Search Search all

Heater and Cooler 2 in 1

ClassificationIndustry News 267

Heater and Cooler 2 in 1

 

Our heater and cooler 2 in 1 is a device for fluid refrigeration heating and temperature control in reactors, reactors, reaction tanks, etc. There are many manufacturers of equipment models in the market, so, how much do you know about our heater and cooler 2 in 1?

First, the operation process introduction of heater and cooler 2 in 1:

In the cooling and heating temperature control of the reaction kettle or reactor, the temperature control of the heater and cooler 2 in 1 reaches the expected temperature range. The whole process will produce a certain chemical reaction, generate heat, and the reaction process is easily affected by the outside, so the placement environment should also be Notice.

When the heater and cooler 2 in 1 is equipped with a reactor or reactor for polymerization, a series of exothermic and endothermic reactions will occur. During the chemical reaction, it is recommended that the surrounding operators should not be too close to avoid some troubles. During the reaction process, if the heat is not removed in time, the reaction pressure will be affected. If the pressure is too high, the entire reaction will be in some danger.

Second, the selection considerations for heater and cooler 2 in 1:

The heater and cooler 2 in 1 can be equipped with reactors or reactors of different sizes for refrigeration, heating and temperature control. Due to the different heat capacities of reactors or reactors of different sizes, their heat absorption or heat release capabilities are also different.

1. Heater and cooler 2 in 1 is used in various industries. When choosing, you need to choose according to the size, weight, type and volume of the jacket or coil of the reactor or reactor. The heat ratio and viscosity of the materials in the reactor are closely related.

2. The temperature required by the heater and cooler 2 in 1 is also related to the temperature requirements of the equipment model, so choose the appropriate model of Guanya high and low temperature all-in-one machine to make the experiment reach the required temperature range.

3. When selecting heater and cooler 2 in 1, it is necessary to calculate the size of the jacket or coil to estimate the time required for temperature control. Users can customize whether they need explosion-proof or isolation according to their needs.

4. Heater and cooler 2 in 1 is divided into air cooling and water cooling. According to different cooling methods, users can choose according to their actual environmental requirements. Water-cooled devices need to be in an environment with ample water. If the water source environment is not suitable, air-cooled equipment can be used.

5. Heater and cooler 2 in 1 have different temperatures and media, and are divided into oil cooling equipment and water cooling equipment. Different temperatures, different media, room temperature, heat transfer oils and refrigerants.

The heater and cooler 2 in 1 can control one or more reaction kettles at the same time. It is a large system device with integrated temperature control. The fully enclosed circulation pipeline can automatically heat or cool according to the process requirements.

 

Customized Solutions For Your Business


Cooling and Heating Systems (SUNDI series)

Temperature Control Range: -120°C to +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Temperature range -40 ~ +200°C series -10 ~ +200°C series -25 ~ +200°C series -25 ~ +300°C series -45 ~ +250°C series -45 ~ +300°C series -60 ~ +250°C series -60 ~ +300°C series -70 ~ +250°C series -80 ~ +250°C series-90 ~ +250°C series -100 ~ +100°C series -25 ~ +200°C one machine for two reactors -40 ~ +200°C one machine for two reactors
Cooling Capacityup to 3kWup to 15kWup to 200kWup to 200kWup to 200kWup to 25kWup to 60kWup to 25kWup to 15kWup to 80kWup to 80kWup to 80kWup to 10*2kWup to 10*2kW

 


Cooling and Heating Systems (WTD series)

(Micro channel / tube reactors specialized)

Temperature Control Range: -70°C to +300°C

Specialized design for micro channel (small liquid holding capacity, strong heat exchange capacity, circulation system high pressure drop)

 

Temperature range -70°C ~ +300°C -45°C ~ +250°C -70°C ~ +200°C
Cooling Capacityup to 7.5kWup to 5.5kWup to 50kW

 


Cooling and Heating Systems (TES series)

Temperature Control Range: -85°C ~ +250°C

Temp Control Accuracy: ± 0.3°C

 

 

Temperature range -45°C ~ +250°C series -85°C ~ +200°C series -60°C ~ +200°C series
Cooling Capacityup to 25kWup to 25kWup to 60kW

 


Cooling and Heating Machines (LTS series)

Temperature Control Range: -80°C to +80°C

It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.

 

 

Temperature range -20°C ~ +80°C series -45°C ~ +80°C series -60°C ~ +80°C series -80°C ~ +80°C series
Flow Control7 ~ 45 L/min7 ~ 45 L/min7 ~ 45 L/min7 ~ 45 L/min

 


Cooling and Heating Circulators

Temperature Control Range: -45°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Temperature range -25°C ~ +200°C series -45°C ~ +250°C series
Cooling Capacityup to 15kWup to 15kW

 


Heating Circulators

Temperature Control Range: +50°C to +300°C

Note: UC series can control the temperature of heat transfer medium. UST series can not only control the temperature of the heat transfer medium, but also control the temperature of the reaction material.

Temperature range +50°C ~ +200°C  (UC series) +50°C ~ +300°C  (UC series) +50°C ~ +300°C  (UST series)
Heating Capacityup to 38kWup to 200kWup to 95kW

 


TCU Multi-reactors Temperature Control System

Temperature Control Range: -120°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Temperature range -45°C ~ +250°C series -120°C ~ +250°C seriesCustomized Temperature Control SystemRT+10°C ~ +135°C
Heating Capacityup to 80kWup to 80kWCustomup to 300kW

 

Copyright information belongs to lneya-online.com, please contact email for details: lilia@lneya.com

Or scan the WhatsApp or WeChat QR code below to contact us. 

WhatsAPP                                   WeChat

scan

Previous: Next:
Get Free Quote Plan

loading...

购物车

X

我的足迹

X

keywords:< a href="https://lneya-online.com/sitemap.html" title="water chiller"target="_blank">Bottled joy < a href="https://lneya-online.com/sitemap.xml" title="water chiller"target="_blank">water chiller