TEL: + 86-187515465184
Please Search Dynamic temp. control systems Ultra-Low Temp. Chillers NEV Test Chillers Thermal Test & Process Cooling TCU Unit
What should be paid attention to in chiller manufacturing design? （1）. The welding method and sealing material shall be selected according to the working stability, pressure and fluid properties....
Details
How should chiller manufacturer choose? 1. First, look at the production scale. The manufacturer with its own production line and large production scale, whose products are used in various industri...
Details
What are the common protections for water cooled chiller system? High pressure protection: High pressure protection is to detect whether the refrigerant pressure in the system is normal. When the p...
Details
What are the anti scaling and anti-corrosion measures for the circulation chiller? Use circulating water to cool the compressor weaving and cooling equipment, and use air cooler and water cooler to...
Details
What is the 50 ton chiller for? (1) Electronic industry: It is mainly used to stabilize the molecular structure of electronic components in the production line and improve the qualification rate of...
Details
What are the common faults of 300 ton chiller? 1. Reasons for water leakage of LC -25°C ~ -5°C Low Temperature Chillers: (1) . The water inlet and outlet are loose or cracked, causing water leakage...
Details
What are the hidden dangers in the use of lab water chiller? Before the actual operation of the LC -25°C ~ -5°C Low Temperature Chillers, it is necessary to configure complete protection measures f...
Details
What are the precautions for oil chiller manufacturers before installation? The LC -25°C ~ -5°C Low Temperature Chillers should be installed vertically. When lifting, pay attention to the center of...
Details
What are the precautions for low temp chiller operation? 1) The initial operation shall be slow, and the temperature shall be fully preheated and gradually increased; 2) Preheat the pressure reduci...
Details
What are the requirements for the installation of air cooled water chiller system? (1) The installation location of the LC -25°C ~ -5°C Low Temperature Chillers should be selected, and the ground m...
Details
How to maintain the key components of industrial chiller machine? (1) Replace lubricating oil After the GX/GY -65°C ~ -10°C Industrial Refrigerators has been used for a long time, the oil quality o...
Details
What are the key points of process water chillers construction? The FL-800N -18°C ~ +30°C Small Water Chiller shall not be deformed, and the fasteners shall not be loose or other mechanical damage....
Details
Maintenance methods and precautions of semiconductor chiller? (1) When inspecting the component with non-special equipment, the temperature of the hot end needs to be lower than 80C (including the ...
Details
How to deal with compressor failure of industrial chiller systems? 1. The suction pressure of the compressor of the LC -25°C ~ -5°C Low Temperature Chillers is low. (1) The opening of expansion val...
Details
How do industrial water chiller manufacturers carry out maintenance work? Check whether the safety and operation controllers are normal. Check whether the refrigerant pipeline system is normal (esp...
Details
What are the characteristics of water cooled industrial chiller? As a kind of water cooling equipment commonly used in industry, LC -25°C ~ -5°C Low Temperature Chillers can provide constant temper...
Details
LNEYA
