Heater and Cooler in one

Heater and Cooler in one

Heater and cooler in one is a kind of mechanical refrigeration and heating equipment widely used in scientific research, biology, physics, medicine, chemical industry and other fields. Our refrigeration constant temperature heating and cooling cycle system has many series (SUNDI, HRT, KRY, TES, etc. ), the temperature range, temperature control accuracy, weight, size and other parameters of different series and models are different.

First, heater and cooler in one introduction:

The heater and cooler in one is composed of compressor, condenser, expansion valve, heat exchanger, temperature controller, circulation pump, pre-cooling unit, heating unit, refrigeration unit and other accessories. Each component has its own function and advantages. When the space is relatively small, the operating power of the equipment can be appropriately reduced, and the appropriate operating power of the constant temperature cooling and heating cycle system group can be selected to reduce the probability of equipment failure and help extend the service life of the equipment. .

The working principle of heater and cooler in one is that the pump drives the heat transfer medium (usually water or oil) from the water tank with built-in heater and cooler to the reactor, and then returns from the reactor to the water tank. The controller adjusts the temperature of the thermal fluid and the temperature of the reactor according to the temperature of the thermal fluid measured by the temperature sensor, or/and the internal temperature of the reactor.

Second, heater and cooler in one selection knowledge:

1. Heater and cooler in one also has some special models, such as isolated explosion-proof models, etc., each with different characteristics, you can choose a specific model according to your own needs. Of course, you can also choose or customize a model to meet your own requirements. Choosing a suitable constant temperature cooling and heating cycle system can not only be put into use quickly, but also cause no waste.

2. Heater and cooler in one have different temperature ranges, different models, and different heat transfer media.

3. Both heater and cooler in one adopt PID control technology. When choosing a constant temperature cooling and heating circulation system, heating power, medium circulation pressure and flow should also be considered. Different raw materials have different processing characteristics.

4. Heater and cooler in one is composed of refrigeration cycle system, heating cycle system and automatic control system. For areas with explosion-proof requirements for equipment, positive pressure explosion-proof boxes can be customized, which not only meet explosion-proof requirements, but also reduce the use of explosion-proof components and reduce the production cost of the whole machine.

5. The realization of heater and cooler in one includes a constant temperature cooling and heating cycle system based on the temperature of the thermal fluid, a constant temperature cooling and heating cycle system based on the reactor temperature, and a combined constant temperature cooling and heating cycle system. According to the actual situation, the user should investigate the operation of the heater and cooler in one, and choose a product that can meet the temperature control accuracy requirements.

Customized Solutions For Your Business

Cooling and Heating Systems (SUNDI series)

Temperature Control Range: -120°C to +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Cooling and Heating Systems (WTD series)

（Micro channel / tube reactors specialized）

Temperature Control Range: -70°C to +300°C

Specialized design for micro channel (small liquid holding capacity, strong heat exchange capacity, circulation system high pressure drop)

Cooling and Heating Systems (TES series)

Temperature Control Range: -85°C ~ +250°C

Temp Control Accuracy: ± 0.3°C

Cooling and Heating Machines (LTS series)

Temperature Control Range: -80°C to +80°C

It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.

Cooling and Heating Circulators

Temperature Control Range: -45°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Heating Circulators

Temperature Control Range: +50°C to +300°C

Note: UC series can control the temperature of heat transfer medium. UST series can not only control the temperature of the heat transfer medium, but also control the temperature of the reaction material.

TCU Multi-reactors Temperature Control System

Temperature Control Range: -120°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.