Heater and Cooler 2 in 1
Our heater and cooler 2 in 1 is a device for fluid refrigeration heating and temperature control in reactors, reactors, reaction tanks, etc. There are many manufacturers of equipment models in the market, so, how much do you know about our heater and cooler 2 in 1?
First, the operation process introduction of heater and cooler 2 in 1:
In the cooling and heating temperature control of the reaction kettle or reactor, the temperature control of the heater and cooler 2 in 1 reaches the expected temperature range. The whole process will produce a certain chemical reaction, generate heat, and the reaction process is easily affected by the outside, so the placement environment should also be Notice.
When the heater and cooler 2 in 1 is equipped with a reactor or reactor for polymerization, a series of exothermic and endothermic reactions will occur. During the chemical reaction, it is recommended that the surrounding operators should not be too close to avoid some troubles. During the reaction process, if the heat is not removed in time, the reaction pressure will be affected. If the pressure is too high, the entire reaction will be in some danger.
Second, the selection considerations for heater and cooler 2 in 1:
The heater and cooler 2 in 1 can be equipped with reactors or reactors of different sizes for refrigeration, heating and temperature control. Due to the different heat capacities of reactors or reactors of different sizes, their heat absorption or heat release capabilities are also different.
1. Heater and cooler 2 in 1 is used in various industries. When choosing, you need to choose according to the size, weight, type and volume of the jacket or coil of the reactor or reactor. The heat ratio and viscosity of the materials in the reactor are closely related.
2. The temperature required by the heater and cooler 2 in 1 is also related to the temperature requirements of the equipment model, so choose the appropriate model of Guanya high and low temperature all-in-one machine to make the experiment reach the required temperature range.
3. When selecting heater and cooler 2 in 1, it is necessary to calculate the size of the jacket or coil to estimate the time required for temperature control. Users can customize whether they need explosion-proof or isolation according to their needs.
4. Heater and cooler 2 in 1 is divided into air cooling and water cooling. According to different cooling methods, users can choose according to their actual environmental requirements. Water-cooled devices need to be in an environment with ample water. If the water source environment is not suitable, air-cooled equipment can be used.
5. Heater and cooler 2 in 1 have different temperatures and media, and are divided into oil cooling equipment and water cooling equipment. Different temperatures, different media, room temperature, heat transfer oils and refrigerants.
The heater and cooler 2 in 1 can control one or more reaction kettles at the same time. It is a large system device with integrated temperature control. The fully enclosed circulation pipeline can automatically heat or cool according to the process requirements.
Soluções personalizadas para o seu negócio
Sistemas de arrefecimento e aquecimento (série SUNDI)
Gama de controlo de temperatura: -120°C a +350°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Gama de temperaturas | Série -40 ~ +200°C | Série -10 ~ +200°C | Série -25 ~ +200°C | Série -25 ~ +300°C | Série -45 ~ +250°C | Série -45 ~ +300°C | Série -60 ~ +250°C | Série -60 ~ +300°C | Série -70 ~ +250°C | Série -80 ~ +250°C | Série -90 ~ +250°C | Série -100 ~ +100°C | -25 ~ +200°C uma máquina para dois reactores | -40 ~ +200°C uma máquina para dois reactores |
Capacidade de arrefecimento | até 3kW | até 15kW | até 200kW | até 200kW | até 200kW | até 25kW | até 60kW | até 25kW | até 15kW | até 80kW | até 80kW | até 80kW | até 10*2kW | até 10*2kW |
Sistemas de arrefecimento e aquecimento (série WTD)
(Reactores de canal micro / tubo especializados)
Gama de controlo de temperatura: -70°C a +300°C
Design especializado para micro canal (pequena capacidade de retenção de líquido, forte capacidade de troca de calor, sistema de circulação de alta queda de pressão)
Gama de temperaturas | -70°C ~ +300°C | -45°C ~ +250°C | -70°C ~ +200°C |
Capacidade de arrefecimento | up to 7.5kW | up to 5.5kW | até 50kW |
Cooling and Heating Systems (TES series)
Temperature Control Range: -85°C ~ +250°C
Temp Control Accuracy: ± 0.3°C
Gama de temperaturas | Série -45°C ~ +250°C | Série -85°C ~ +200°C | Série -60°C ~ +200°C |
Capacidade de arrefecimento | até 25kW | até 25kW | até 60kW |
Cooling and Heating Machines (LTS series)
Temperature Control Range: -80°C to +80°C
It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.
Gama de temperaturas | Série -20°C ~ +80°C | Série -45°C ~ +80°C | Série -60°C ~ +80°C | Série -80°C ~ +80°C |
Controlo do fluxo | 7 ~ 45 L/min | 7 ~ 45 L/min | 7 ~ 45 L/min | 7 ~ 45 L/min |
Circuladores de arrefecimento e aquecimento
Gama de controlo de temperatura: -45°C a +250°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Gama de temperaturas | Série -25°C ~ +200°C | Série -45°C ~ +250°C |
Capacidade de arrefecimento | até 15kW | até 15kW |
Circuladores de aquecimento
Gama de controlo de temperatura: +50°C a +300°C
Nota: A série UC pode controlar a temperatura do meio de transferência de calor. A série UST pode não só controlar a temperatura do meio de transferência de calor, mas também controlar a temperatura do material de reação.
Gama de temperaturas | +50°C ~ +200°C (UC series) | +50°C ~ +300°C (série UC) | +50°C ~ +300°C (série UST) |
Capacidade de aquecimento | até 38kW | até 200kW | até 95kW |
TCU Sistema de controlo da temperatura de multi-reactores
Gama de controlo de temperatura: -120°C a +250°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Gama de temperaturas | Série -45°C ~ +250°C | Série -120°C ~ +250°C | Sistema de controlo de temperatura personalizado | RT+10°C ~ +135°C |
Capacidade de aquecimento | até 80kW | até 80kW | Personalizado | up to 300kW |