Tips for Operating a Chiller
The chiller is a cooling water device that can provide constant temperature, constant current and constant pressure. The working principle of the chiller is to first inject a certain amount of water into the water tank in the machine, cool the water through the chiller refrigeration system, and then send the low-temperature cooling water to the equipment to be cooled by the water pump. It is raised and then returned to the water tank to achieve cooling. When using, the user should pay attention to the following matters.
1. During installation, please check whether the machine is damaged, and choose a suitable place to facilitate installation and future maintenance.
2. The site where the unit is installed must be the floor, the installation pad or the foundation, its level is within 6.4mm, and it can bear the operating weight of the equipment.
3. The equipment should be placed in a computer room with a room temperature of 4.4~43.3°C, and there should be enough space around and above the equipment for routine maintenance.
4. At one end of the unit, a draining space for cleaning the condenser tube bundle should be reserved, and a door opening or other suitable openings can also be used.
5. Select the water pipe with the appropriate diameter, the cooling system and the cold water system when the unit is running at the maximum power, and connect them correctly.
6. For ordinary applications, the speed of water flow through the evaporator and condenser is allowed to be between 1.0-3.6m/s.
7. Under any load conditions, the water flow should be kept stable.
3.冷水配管及び冷却水配管の設計及び施工は、すべて常法に従って行い、冷水ポンプは、装置内の正圧及び流量を確保するため、装置の水入口配管上に設置する。配管時には防振管を設置し、適切な弾性を確保するとともに、ポンプ停止時に蒸発器の水が排出されないようにする。
9. The pipeline should have a firm support independent of the chiller to avoid stress on the components of the chiller. The hanger should be set to facilitate pipe alignment.
私たちは、最高級のオンタイムデリバリーをお約束 温度制御機器プロンプトが表示さに裏打ちされ、慎重アフターサービス。 ご相談ください 詳細はこちら!
温度制御範囲:-150℃~+50
温度制御範囲:-120°C~+350°C
温度制御範囲:-40℃~+100
温度制御範囲:-85℃~+250
温度制御範囲:-150℃~-10