Tips for Operating a Chiller
The chiller is a cooling water device that can provide constant temperature, constant current and constant pressure. The working principle of the chiller is to first inject a certain amount of water into the water tank in the machine, cool the water through the chiller refrigeration system, and then send the low-temperature cooling water to the equipment to be cooled by the water pump. It is raised and then returned to the water tank to achieve cooling. When using, the user should pay attention to the following matters.
1. During installation, please check whether the machine is damaged, and choose a suitable place to facilitate installation and future maintenance.
2. The site where the unit is installed must be the floor, the installation pad or the foundation, its level is within 6.4mm, and it can bear the operating weight of the equipment.
3. The equipment should be placed in a computer room with a room temperature of 4.4~43.3°C, and there should be enough space around and above the equipment for routine maintenance.
4. At one end of the unit, a draining space for cleaning the condenser tube bundle should be reserved, and a door opening or other suitable openings can also be used.
5. Select the water pipe with the appropriate diameter, the cooling system and the cold water system when the unit is running at the maximum power, and connect them correctly.
6. For ordinary applications, the speed of water flow through the evaporator and condenser is allowed to be between 1.0-3.6m/s.
7. Under any load conditions, the water flow should be kept stable.
3. O projeto e a instalação de todas as tubagens de água refrigerada e de água de arrefecimento devem ser realizados de acordo com os métodos convencionais, e a bomba de água refrigerada deve estar localizada no tubo de entrada de água do equipamento para garantir uma pressão e um fluxo positivos no equipamento. Devem ser instalados tubos absorventes de vibrações durante a tubagem para garantir uma elasticidade adequada e também para evitar que a água do evaporador seja drenada quando a bomba é parada.
9. The pipeline should have a firm support independent of the chiller to avoid stress on the components of the chiller. The hanger should be set to facilitate pipe alignment.
Nós somos um fabricante profissional de equipamento de controlo de temperatura, apoiando serviços personalizados, por favor consulte-nos para mais pormenores!
Gama de controlo de temperatura: -150°C a +50°C
Sistemas dinâmicos de controlo da temperatura
Gama de controlo de temperatura: -120°C a +350°C
Refrigeradores de teste para automóveis
Gama de controlo de temperatura: -40°C a +100°C
Refrigeradores de teste de semicondutores
Gama de controlo de temperatura: -85°C a +250°C
Gama de controlo de temperatura: -150°C a -10°C