Tips for Operating a Chiller

2022/09/14 ClassificazioneNotizie sul settore 160

Tips for Operating a Chiller

The chiller is a cooling water device that can provide constant temperature, constant current and constant pressure. The working principle of the chiller is to first inject a certain amount of water into the water tank in the machine, cool the water through the chiller refrigeration system, and then send the low-temperature cooling water to the equipment to be cooled by the water pump. It is raised and then returned to the water tank to achieve cooling. When using, the user should pay attention to the following matters.

1. During installation, please check whether the machine is damaged, and choose a suitable place to facilitate installation and future maintenance.

2. The site where the unit is installed must be the floor, the installation pad or the foundation, its level is within 6.4mm, and it can bear the operating weight of the equipment.

3. The equipment should be placed in a computer room with a room temperature of 4.4~43.3°C, and there should be enough space around and above the equipment for routine maintenance.

4. At one end of the unit, a draining space for cleaning the condenser tube bundle should be reserved, and a door opening or other suitable openings can also be used.

5. Select the water pipe with the appropriate diameter, the cooling system and the cold water system when the unit is running at the maximum power, and connect them correctly.

6. For ordinary applications, the speed of water flow through the evaporator and condenser is allowed to be between 1.0-3.6m/s.

7. Under any load conditions, the water flow should be kept stable.

3. La progettazione e l'installazione di tutte le tubazioni dell'acqua refrigerata e dell'acqua di raffreddamento devono essere eseguite secondo i metodi convenzionali e la pompa dell'acqua refrigerata deve essere posizionata sulla tubazione di ingresso dell'acqua dell'apparecchiatura per garantire una pressione e un flusso positivi nell'apparecchiatura. I tubi antivibranti devono essere installati durante le tubazioni per garantire un'adeguata elasticità e per evitare che l'acqua dell'evaporatore venga scaricata quando la pompa è ferma.

9. The pipeline should have a firm support independent of the chiller to avoid stress on the components of the chiller. The hanger should be set to facilitate pipe alignment.

Siamo un produttore professionale di apparecchiature di controllo della temperatura, sostenendo servizi personalizzati, si prega di consultateci per i dettagli!