Tips for Operating a Chiller

2022/09/14 분류업계 뉴스 165

Tips for Operating a Chiller

The chiller is a cooling water device that can provide constant temperature, constant current and constant pressure. The working principle of the chiller is to first inject a certain amount of water into the water tank in the machine, cool the water through the chiller refrigeration system, and then send the low-temperature cooling water to the equipment to be cooled by the water pump. It is raised and then returned to the water tank to achieve cooling. When using, the user should pay attention to the following matters.

1. During installation, please check whether the machine is damaged, and choose a suitable place to facilitate installation and future maintenance.

2. The site where the unit is installed must be the floor, the installation pad or the foundation, its level is within 6.4mm, and it can bear the operating weight of the equipment.

3. The equipment should be placed in a computer room with a room temperature of 4.4~43.3°C, and there should be enough space around and above the equipment for routine maintenance.

4. At one end of the unit, a draining space for cleaning the condenser tube bundle should be reserved, and a door opening or other suitable openings can also be used.

4. 장비가 최대 전력으로 작동 중일 때 적절한 직경의 수도관, 냉각 시스템 및 냉수 시스템을 선택하고 올바르게 연결하세요.

6. For ordinary applications, the speed of water flow through the evaporator and condenser is allowed to be between 1.0-3.6m/s.

7. Under any load conditions, the water flow should be kept stable.

3. 모든 냉수 및 냉각수 파이프의 설계 및 설치는 기존 방법에 따라 수행되어야 하며, 냉수 펌프는 장비의 양압 및 흐름을 보장하기 위해 장비의 급수관에 위치해야 합니다. 배관 중에는 적절한 탄성을 보장하고 펌프가 멈출 때 증발기의 물이 배수되지 않도록 진동 흡수 파이프를 설치해야 합니다.

9. The pipeline should have a firm support independent of the chiller to avoid stress on the components of the chiller. The hanger should be set to facilitate pipe alignment.

우리는 온도 제어 장비의 전문 제조업체로 맞춤형 서비스를 지원합니다. 문의하기 자세한 내용을 확인하세요!