Heater Chiller

Heater Chiller

Heater chiller is also called high and low temperature all-in-one machine, refrigeration heating temperature control system, etc. in the industry. Different manufacturers may call it differently, but the functions of this type of equipment are similar. They are routinely used in supporting reaction kettles in the pharmaceutical and chemical industries. To provide the temperature requirements for heat absorption and heat release.

First, the application introduction of heater chiller

1. The heater chiller can be equipped with reactors, reactors, extraction equipment, rotary evaporators and other instruments to increase and decrease different temperatures, and provide endothermic and exothermic reactions. Users can use explosion-proof reactors to achieve their needs. The temperature range supported by our equipment is -120°C~350°C.

2. The heater chiller can provide accurate temperature process control. It can be equipped with one reactor or multiple reactors for cooling, heating and temperature control. Using a closed circulation pipeline system, water vapor will not be absorbed during low-temperature reactions, and high-temperature reactions will not Oil mist will be generated, which can realize connection temperature rise and fall control within a certain range.

Second, precautions for heater chiller

1. Read the instruction manual before using the heater chiller, and have a certain understanding of the appearance and configuration of the equipment;

2. Turn on the power of the heater chiller, and set it according to the circuit requirements in the manual;

3. The switch of the heater chiller can be set separately and connected in parallel in the circuit to ensure that the shutdown of other equipment circuit failures will not affect the use of the equipment;

4. Check the tightness of the connecting pipeline interface between the heater chiller and supporting equipment;

5. When the heater chiller is connected to supporting equipment, care should be taken to avoid air bubbles remaining in the system, to ensure that the outlet of the heat transfer medium is connected to the lower interface of the reactor, and the inlet of the heat transfer medium is connected to the upper interface of the reactor;

6. When filling the heat transfer oil, you need to pay attention to the type of heat transfer oil. Different models have different temperature requirements. The temperature range of the heater chiller should match the temperature range of the heat transfer oil;

7. When the heater chiller is filled with heat-conducting medium, care should be taken to prevent the heat-conducting medium from overflowing to the upper cover plate, and the liquid overflowing to the upper cover plate may cause the heat-conducting medium to leak into the electrical components of the equipment, which may cause equipment failure;

8. When the temperature control effect of the equipment is not satisfactory, the user can perform system self-tuning. During the self-tuning process, the temperature will have a large overshoot, and the user should fully consider this factor before performing the system self-tuning;

9. After the heater chiller is filled with heat transfer medium and exhausted, it can start to control the temperature. After setting the temperature, press the circulation button and the refrigeration button (the circulation pump must be kept working when the equipment is running, otherwise it will cause system error). When the temperature reaches the set value, the refrigeration will be automatically turned off, and the refrigeration compressor will be turned on after the temperature rises;

Heater chiller is a kind of equipment that integrates heating, high temperature and cooling technology of cooling, heating and temperature control. During use, you need to use and maintain your product correctly, so that the equipment can be kept in good operating condition and exert high-quality temperature control effect.

カスタマイズされたソリューション

冷暖房システム (SUNDIシリーズ)

温度制御範囲：-120°C～+350°C

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、自動車産業、半導体および電気テスト、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学およびその他の産業。

冷暖房システム（WTDシリーズ）

（マイクロチャンネル・チューブリアクター特化型）

温度制御範囲：-70℃～+300

マイクロ流路に特化した設計（液体保持容量が小さく、熱交換容量が大きく、循環システムの圧力損失が高い）

冷暖房システム (TESシリーズ)

温度制御範囲: -85°C ~ +250°C

温度制御精度： ± 0.3°C

冷却・加熱装置（LTSシリーズ）

温度制御範囲：-80°C～+80°C

半導体プロセスにおいて、反応チャンバー、ホットシンクプレート、不燃性熱媒体の温度制御に広く使用されています。

冷暖房サーキュレーター

温度制御範囲：-45℃～+250

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学、その他の産業。

加熱サーキュレーター

温度制御範囲+50℃〜+300

注：UCシリーズは熱媒体の温度を制御することができる。USTシリーズは熱媒の温度を制御できるだけでなく、反応材料の温度も制御できます。

TCU マルチリアクター温度制御システム

温度制御範囲：-120°C～+250°C

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学、その他の産業。