Small Water Chiller Unit
If the small water chiller unit is in a long-term working state, failures and reduced service life will inevitably occur. Therefore, it is very important to do regular maintenance of the small water chiller unit. It can not only prolong the service life of the equipment, but also reduce the failure rate, and greatly reduce the maintenance cost of the enterprise, and will not delay the production schedule. So how should we usually maintain the small water chiller unit that works for a long time? Below we will tell you how.
1. Alarm failure
If the small water chiller unit has an alarm fault, first we press the alarm button on the device, and then troubleshoot one by one. Before troubleshooting the fault, the device cannot be turned on forcibly. If it is forced to start, it will cause a bigger fault.
2. Cleaning work
For the cleaning of evaporator, condenser and pipes, it is recommended that you carry out cleaning work every six months.
3. Dirt cleaning
If it is a water-cooled chiller, it is equipped with a cooling water tower, and the impurities in the cooling water tower and the dirt accumulated over a long period of time need to be cleaned.
4. Lubricating oil
If the lubricating oil in the small water chiller unit is polluted, it needs to be replaced to avoid affecting the normal operation of the compressor.
5. Fan steering
If it is an air-cooled chiller, it is equipped with a fan. If the fan is reversed, it may be that the master has connected the power cord backwards. First shut down, then adjust the power cord and then start it.
6. Cooling and cleaning
The heat dissipation coil in the small water chiller unit should be kept clean and free of dirt, and the surrounding air should be kept smooth, so as to have a good heat dissipation environment.
7. Blockage
Check the filter to see if the pipe is clogged. If the filter is clogged, it needs to be replaced in time. The pipe can be checked and cleared by yourself.
低温チラー(水冷式・空冷式)
温度制御範囲:-150℃~-5
当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。
温度範囲 | -25°C ~ -5°Cシリーズ | -45°C ~ -10°Cシリーズ | -60°C ~ -10°Cシリーズ | -80°C ~ -30°Cシリーズ | -110°C ~ -50°Cシリーズ |
冷却能力 | 最大360kW | 最大360kW | 最大360kW | 270kWまで | 180kWまで |
循環式チラー (水冷・空冷)
温度制御範囲:-120℃~+30
私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。
温度範囲 | -25°C ~ +30°Cシリーズ | -45°C ~ +30°Cシリーズ | -60°C ~ -20°Cシリーズ | -80°C ~ -20°Cシリーズ | -120°C ~ -70°Cシリーズ |
冷却能力 | 最大38kW | 最大12kW | 最大7.2kW | 最大7.2kW | 最大8.6kW |
室温チラー/小型チラー
温度制御範囲+5℃〜+50
チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。
温度範囲 | -18°C ~ +30°C | +5°C ~ +35°Cシリーズ |
冷却能力 | 0.9kWまで | 最大50kW |
直接冷却式冷凍機
温度制御範囲:-120℃~-10
熱交換面積が小さく、熱交換が大きい場所に適している。
温度範囲 | -40°C ~ -10°C | -80°C ~ -35°C | -120°C ~ -90°C |
コンプレッサーパワー | 8HPまで | 最大8HP*2 | 45HP*3まで |
直接冷却式超低温チラー
温度制御範囲:-150℃~-110
お客様のビジネスにカスタマイズされたソリューションを提供します。
温度範囲 | -150°C〜-110°C |
冷却能力 | 最大11kW |
スクリュー冷凍機
低温スクリュー冷凍機と常温スクリュー冷凍機
お客様のビジネスにカスタマイズされたソリューションを提供します。
温度範囲 | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | -25°C ~ +5°C | -25°C ~ +5°C |
冷却能力 | 最大1027kW(シングルコンプレッサー) | 最大2134kW(デュアルコンプレッサー) | 最大934kW(シングルコンプレッサー) | 最大1940kW(デュアルコンプレッサー) | 最大467kW(シングルコンプレッサー) | 最大497kW(シングルコンプレッサー) |