Small Water Chiller Unit

Small Water Chiller Unit

If the small water chiller unit is in a long-term working state, failures and reduced service life will inevitably occur. Therefore, it is very important to do regular maintenance of the small water chiller unit. It can not only prolong the service life of the equipment, but also reduce the failure rate, and greatly reduce the maintenance cost of the enterprise, and will not delay the production schedule. So how should we usually maintain the small water chiller unit that works for a long time? Below we will tell you how.

1. Alarm failure

If the small water chiller unit has an alarm fault, first we press the alarm button on the device, and then troubleshoot one by one. Before troubleshooting the fault, the device cannot be turned on forcibly. If it is forced to start, it will cause a bigger fault.

2. Cleaning work

For the cleaning of evaporator, condenser and pipes, it is recommended that you carry out cleaning work every six months.

3. Dirt cleaning

If it is a water-cooled chiller, it is equipped with a cooling water tower, and the impurities in the cooling water tower and the dirt accumulated over a long period of time need to be cleaned.

4. Lubricating oil

If the lubricating oil in the small water chiller unit is polluted, it needs to be replaced to avoid affecting the normal operation of the compressor.

5. Fan steering

If it is an air-cooled chiller, it is equipped with a fan. If the fan is reversed, it may be that the master has connected the power cord backwards. First shut down, then adjust the power cord and then start it.

6. Cooling and cleaning

The heat dissipation coil in the small water chiller unit should be kept clean and free of dirt, and the surrounding air should be kept smooth, so as to have a good heat dissipation environment.

7. Blockage

Check the filter to see if the pipe is clogged. If the filter is clogged, it needs to be replaced in time. The pipe can be checked and cleared by yourself.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 냉각기

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.