Small Water Chiller Unit

Small Water Chiller Unit

If the small water chiller unit is in a long-term working state, failures and reduced service life will inevitably occur. Therefore, it is very important to do regular maintenance of the small water chiller unit. It can not only prolong the service life of the equipment, but also reduce the failure rate, and greatly reduce the maintenance cost of the enterprise, and will not delay the production schedule. So how should we usually maintain the small water chiller unit that works for a long time? Below we will tell you how.

1. Alarm failure

If the small water chiller unit has an alarm fault, first we press the alarm button on the device, and then troubleshoot one by one. Before troubleshooting the fault, the device cannot be turned on forcibly. If it is forced to start, it will cause a bigger fault.

2. Cleaning work

For the cleaning of evaporator, condenser and pipes, it is recommended that you carry out cleaning work every six months.

3. Dirt cleaning

If it is a water-cooled chiller, it is equipped with a cooling water tower, and the impurities in the cooling water tower and the dirt accumulated over a long period of time need to be cleaned.

4. Lubricating oil

If the lubricating oil in the small water chiller unit is polluted, it needs to be replaced to avoid affecting the normal operation of the compressor.

5. Fan steering

If it is an air-cooled chiller, it is equipped with a fan. If the fan is reversed, it may be that the master has connected the power cord backwards. First shut down, then adjust the power cord and then start it.

6. Cooling and cleaning

The heat dissipation coil in the small water chiller unit should be kept clean and free of dirt, and the surrounding air should be kept smooth, so as to have a good heat dissipation environment.

7. Blockage

Check the filter to see if the pipe is clogged. If the filter is clogged, it needs to be replaced in time. The pipe can be checked and cleared by yourself.

Soluções personalizadas para o seu negócio

Chillers de baixa temperatura (arrefecidos a água e a ar)

Gama de controlo de temperatura: -150°C a -5°C

Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.

Chillers de recirculação (Arrefecimento a água e ar)

Gama de controlo de temperatura: -120°C a +30°C

Nosso resfriador de recirculação adota tecnologia de refrigeração de baixa temperatura, a temperatura é tão baixa quanto -120 ℃ e vários acessórios são personalizáveis.

Refrigeradores de temperatura ambiente / Refrigeradores pequenos

Gama de controlo de temperatura: +5°C a +50°C

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Equipamentos de refrigeração do tipo arrefecimento direto

Gama de controlo de temperatura: -120°C a -10°C

É adequado para locais com pequena área de troca de calor e grande troca de calor.

Chillers de arrefecimento direto de temperatura ultra baixa

Gama de controlo de temperatura: -150°C a -110°C

Soluções personalizadas para a sua empresa.

Chillers de parafuso

Refrigeradores de parafuso a baixa temperatura e refrigeradores de parafuso a temperatura ambiente

Soluções personalizadas para a sua empresa.