Small Water Chiller Unit

Small Water Chiller Unit

If the small water chiller unit is in a long-term working state, failures and reduced service life will inevitably occur. Therefore, it is very important to do regular maintenance of the small water chiller unit. It can not only prolong the service life of the equipment, but also reduce the failure rate, and greatly reduce the maintenance cost of the enterprise, and will not delay the production schedule. So how should we usually maintain the small water chiller unit that works for a long time? Below we will tell you how.

1. Alarm failure

If the small water chiller unit has an alarm fault, first we press the alarm button on the device, and then troubleshoot one by one. Before troubleshooting the fault, the device cannot be turned on forcibly. If it is forced to start, it will cause a bigger fault.

2. Cleaning work

For the cleaning of evaporator, condenser and pipes, it is recommended that you carry out cleaning work every six months.

3. Dirt cleaning

If it is a water-cooled chiller, it is equipped with a cooling water tower, and the impurities in the cooling water tower and the dirt accumulated over a long period of time need to be cleaned.

4. Lubricating oil

If the lubricating oil in the small water chiller unit is polluted, it needs to be replaced to avoid affecting the normal operation of the compressor.

5. Fan steering

If it is an air-cooled chiller, it is equipped with a fan. If the fan is reversed, it may be that the master has connected the power cord backwards. First shut down, then adjust the power cord and then start it.

6. Cooling and cleaning

The heat dissipation coil in the small water chiller unit should be kept clean and free of dirt, and the surrounding air should be kept smooth, so as to have a good heat dissipation environment.

7. Blockage

Check the filter to see if the pipe is clogged. If the filter is clogged, it needs to be replaced in time. The pipe can be checked and cleared by yourself.

Maßgeschneiderte Lösungen für Ihr Unternehmen

Low Temperature Chillers (Water Cooled & Air Cooled)

Temperaturregelbereich: -150°C bis -5°C

Wir haben uns auf die Herstellung von Niedertemperaturkältemaschinen mit einem Temperaturregelbereich von bis zu -150°C spezialisiert, die den Kühlbedarf verschiedener Branchen decken.

Rückkühler (Water Cooled & Air Cooled)

Temperature Control Range: -120°C to +30°C

Unser Rückkühler arbeitet mit Niedertemperatur-Kältetechnik, die Temperatur beträgt bis zu -120℃, und verschiedene Zubehörteile sind anpassbar.

Raumtemperatur-Kühlgeräte / Kleinkühlgeräte

Temperaturregelbereich: +5°C bis +50°C

Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.

Kühlgeräte mit direkter Kühlung

Temperature Control Range: -120°C to -10°C

Er eignet sich für Orte mit kleiner Wärmeaustauschfläche und großem Wärmeaustausch.

Direktkühlende Ultra-Niedrigtemperatur-Kühlgeräte

Temperature Control Range: -150°C to -110°C

Customized solutions for your business.

Schrauben-Kühlmaschinen

Niedertemperatur-Schraubenkühlmaschinen und Raumtemperatur-Schraubenkühlmaschinen

Customized solutions for your business.