Cooler Heater
The correct debugging of the cooler heater is related to the operation of the entire equipment. For the cooling and heating system of the cooler heater, it is necessary to make preparations before debugging and cooperate closely to avoid misoperation of the equipment.
Since the cooler heater is a medium-to-large equipment, it requires close cooperation in design, installation, and use during commissioning. In order to ensure that the commissioning work is carried out in an orderly manner, it is necessary to form a temporary trial operation team with relevant personnel to fully command the commissioning work.
The personnel in charge of commissioning should be fully familiar with the structure and performance of the cooler heater, familiar with the safety technology of the refrigerator, clarify the debugging methods, steps and technical requirements to be met, formulate a detailed and specific commissioning plan, and let the commissioning personnel in each position clarify their own tasks and requirements.
Check whether the installation of the cooler heater meets the technical requirements, whether the foundation meets the requirements, and whether the size, specification, and material of the connecting pipeline meet the design requirements.
The power supply system of the cooler heater should be completely installed and passed the debugging. Carry out a water flow test on the refrigeration system alone, flush the dirt in the water system, the water pump should work normally, and the circulating water volume meets the requirements of the working conditions.
Clean up the environment where the cooler heater is debugged to achieve a clean, bright, and unimpeded flow. Prepare various general tools and special tools required for debugging, and prepare various measuring instruments such as pressure, temperature, flow, quality, and time for debugging, Instruments, prepare the necessary safety protection equipment for commissioning and operation.
After the cooler heater is ready for commissioning, professional commissioning personnel will conduct commissioning, and carefully read the operating instructions provided by the manufacturer before commissioning.
Soluciones personalizadas para su empresa
Sistemas de refrigeración y calefacción (serie SUNDI)
Rango de control de temperatura: -120°C a +350°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Temperatura | Serie -40 ~ +200°C | Serie -10 ~ +200°C | Serie -25 ~ +200°C | Serie -25 ~ +300°C | Serie -45 ~ +250°C | Serie -45 ~ +300°C | Serie -60 ~ +250°C | Serie -60 ~ +300°C | Serie -70 ~ +250°C | Serie -80 ~ +250°C | Serie -90 ~ +250°C | Serie -100 ~ +100°C | -25 ~ +200°C una máquina para dos reactores | -40 ~ +200°C una máquina para dos reactores |
Capacidad de refrigeración | hasta 3 kW | hasta 15 kW | hasta 200 kW | hasta 200 kW | hasta 200 kW | hasta 25 kW | hasta 60 kW | hasta 25 kW | hasta 15 kW | hasta 80 kW | hasta 80 kW | hasta 80 kW | hasta 10*2 kW | hasta 10*2 kW |
Sistemas de refrigeración y calefacción (serie WTD)
(Microcanales / reactores tubulares especializados)
Rango de control de temperatura: de -70°C a +300°C
Diseño especializado para microcanal (pequeña capacidad de retención de líquido, gran capacidad de intercambio de calor, sistema de circulación de alta caída de presión)
Temperatura | -70°C ~ +300°C | -45°C ~ +250°C | -70°C ~ +200°C |
Capacidad de refrigeración | up to 7.5kW | up to 5.5kW | hasta 50 kW |
Cooling and Heating Systems (TES series)
Temperature Control Range: -85°C ~ +250°C
Temp Control Accuracy: ± 0.3°C
Temperatura | Serie -45°C ~ +250°C | Serie -85°C ~ +200°C | Serie -60°C ~ +200°C |
Capacidad de refrigeración | hasta 25 kW | hasta 25 kW | hasta 60 kW |
Cooling and Heating Machines (LTS series)
Temperature Control Range: -80°C to +80°C
It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.
Temperatura | Serie -20°C ~ +80°C | Serie -45°C ~ +80°C | Serie -60°C ~ +80°C | Serie -80°C ~ +80°C |
Control de caudal | 7 ~ 45 L/min | 7 ~ 45 L/min | 7 ~ 45 L/min | 7 ~ 45 L/min |
Circuladores de refrigeración y calefacción
Rango de control de temperatura: -45°C a +250°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Temperatura | Serie -25°C ~ +200°C | Serie -45°C ~ +250°C |
Capacidad de refrigeración | hasta 15 kW | hasta 15 kW |
Termostatos de circulación
Rango de control de temperatura: +50°C a +300°C
Nota: La serie UC puede controlar la temperatura del medio de transferencia de calor. La serie UST no solo puede controlar la temperatura del medio de transferencia de calor, sino también la temperatura del material de reacción.
Temperatura | +50°C ~ +200°C (UC series) | +50°C ~ +300°C (serie UC) | +50°C ~ +300°C (serie UST) |
Capacidad de calefacción | hasta 38 kW | hasta 200 kW | hasta 95 kW |
TCU Sistema de control de temperatura multirreactores
Rango de control de temperatura: -120°C a +250°C
Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.
Temperatura | Serie -45°C ~ +250°C | Serie -120°C ~ +250°C | Sistema de control de temperatura personalizado | RT+10°C ~ +135°C |
Capacidad de calefacción | hasta 80 kW | hasta 80 kW | A medida | up to 300kW |