chiller 7 kw – Refrigeration Coolers

chiller 7 kw – Refrigeration Coolers

Due to the improvement of the cost performance of industrial processing equipment, traditional processing methods have been widely replaced. Industrial processing equipment is similar to industrial robots, which can replace many traditional equipment in industrial production, such as industrial marking machine instead of inkjet printer, industrial cutting machine instead of flame cutting equipment, industrial welding machine instead of traditional welding equipment, etc. However, the application of 7 kw chiller is indispensable in these industrial processing equipment. As a high-efficiency refrigeration equipment, the chiller can provide it with a good cooling effect. So what is the reason why the 7 kw chiller does not cool and there is no alarm during use?

Reasons and solutions for 7 kw chiller not cooling:

1. The dust-proof net is blocked, which affects the air volume of the air inlet.

The dust filter plays the role of filtering dust and particles in the 7 kw chiller, and its purpose is to reduce or eliminate the possibility of impurities entering the refrigeration system. When the filter is clogged, dust will gradually accumulate on the condenser, which will affect the heat dissipation of the case, and will directly affect the cooling effect of the chiller in the long run. If it is more serious, it will directly cause the equipment to be unusable, and it will not be able to cool at all. Therefore, it is necessary to check and clean regularly. It is recommended to clean it once every 40 days, which will also help to extend the service life of the 7 kw chiller.

2. There are impurities in the water quality, which may easily cause blockage of the plate changer.

There are too many impurities in tap water, which are attached to the inner wall of the water pipe, which may easily cause insufficient water supply, thus affecting the cooling effect. Therefore, under normal circumstances, it is recommended to use pure water as the circulating medium for the 7 kw chiller, and regularly replace the water quality of the water chiller to ensure the normal operation of the chiller.

3. Insufficient circulating medium (water/ethylene glycol).

When the internal cooling medium content of the 7 kw chiller is too small, it will cause difficulty in water circulation of the equipment, and the heat generated by the cooling equipment cannot be taken away in time. Due to long-term water shortage, the water pump may be burned out, and the cooling effect will be greatly reduced. Therefore, we should regularly check the coolant content to see if the liquid level is maintained between high and low, and add it in time when the coolant is too low.

Customized Solutions For Your Business

Low Temperature Chillers (Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

Recirculating Chillers (Custom Designs)

Our recirculating chiller adopts low-temperature refrigeration technology, the temperature is as low as -120℃, and various accessories are customizable.

Room Temperature Chillers / Small Chillers (Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Direct Cooling Type Refrigeration Equipments (Custom Designs)

It is suitable for places with small heat exchange area and large heat exchange.

Chillers for Automotive Battery Test (Custom Designs)

Temperature simulation for vehicle quality test: battery life test, fuel injector/motor test bench, airbag test, component test bench, etc.

Temperature / Pressure / Flow can be independently controlled.

1&2: one machine for two groups control.

Temperature remains constant, pressure / flow can be independently controlled.

1&3: one machine for three groups control.

1&6: one machine for six groups control.

Semiconductor Chillers (TES series) (Custom Designs)

Suitable for precise temperature control of electronic components. In the manufacture of semiconductor electronic components for harsh environments, the IC packaging assembly and engineering and production testing phases include electronic thermal testing and other environmental testing simulations.

Semiconductor Chillers (LTS series) (Custom Designs)

Suitable for precise temperature control of electronic components. In the manufacture of semiconductor electronic components for harsh environments, the IC packaging assembly and engineering and production testing phases include electronic thermal testing and other environmental testing simulations.

Chillers for Energy Storage(Custom Designs)

Liquid Cooling Solutions For Battery Energy Storage Systems

Screw Chillers (Custom Designs)

Low temperature screw chillers and room temperature screw chillers