Air-Cooled Chiller Installation
step 1:
The first task is to choose the installation location of the air-cooled chiller unit. This location provides adequate cooling for the entire surrounding area.
Step 2:
Makes the ground at the selected location shockproof. This can be done with the usual anti-vibration pads and rubber.
Step 3:
After preparing the location and ground setup, place the chiller to finish making sure not to damage it during delivery.
Step 4:
Unpack all parts and inspect all parts for any malfunction or damage.
Step 5:
Unpack the parts according to the chiller manufacturer’s instructions.
Step 6:
Follow the instructions to assemble the parts and start your air-cooled chiller unit.
Step 7:
Connect the chiller to a suitable power source and start it. Reset the operating parameters and initial settings according to your requirements.
Step 8:
Run the device for at least 15 minutes before using it for process applications.
Step 9:
Check that it is working effectively during those 15 minutes, then start your air-cooled chiller unit for process application.
우리는 온도 제어 장비의 전문 제조업체로 맞춤형 서비스를 지원합니다. 문의하기 자세한 내용을 확인하세요!
온도 제어 범위: -150°C ~ +50°C
온도 제어 범위: -120°C ~ +350°C
온도 제어 범위: -40°C ~ +100°C
온도 제어 범위: -85°C ~ +250°C
온도 제어 범위: -150°C ~ -10°C