Air-Cooled Chiller Installation

Air-Cooled Chiller Installation

step 1:

The first task is to choose the installation location of the air-cooled chiller unit. This location provides adequate cooling for the entire surrounding area.

Step 2:

Makes the ground at the selected location shockproof. This can be done with the usual anti-vibration pads and rubber.

Step 3:

After preparing the location and ground setup, place the chiller to finish making sure not to damage it during delivery.

Step 4:

Unpack all parts and inspect all parts for any malfunction or damage.

Step 5:

Unpack the parts according to the chiller manufacturer’s instructions.

Step 6:

Follow the instructions to assemble the parts and start your air-cooled chiller unit.

Step 7:

Connect the chiller to a suitable power source and start it. Reset the operating parameters and initial settings according to your requirements.

Step 8:

Run the device for at least 15 minutes before using it for process applications.

Step 9:

Check that it is working effectively during those 15 minutes, then start your air-cooled chiller unit for process application.

Siamo un produttore professionale di apparecchiature di controllo della temperatura, sostenendo servizi personalizzati, si prega di consultateci per i dettagli!

Refrigeratori d'acqua

Intervallo di controllo della temperatura: da -150°C a +50°C

Sistemi di controllo dinamico della temperatura

Intervallo di controllo della temperatura: da -120°C a +350°C

Refrigeratori di prova per automobili

Intervallo di controllo della temperatura: da -40°C a +100°C

Refrigeratori di prova per semiconduttori

Intervallo di controllo della temperatura: da -85°C a +250°C

Frigoriferi industriali

Intervallo di controllo della temperatura: da -150°C a -10°C