Jacketed Reactor Heating and Cooling Circulator

The jacketed reactor heating and cooling circulator is an advanced temperature control equipment that is widely used in laboratory research and production in the fields of chemistry, biology, medicine and other fields. It achieves precise control of the internal temperature of the reactor through the circulating flow of the medium in the jacket, thereby ensuring the stability and reliability of the experiment or production process.

The composition and working principle of jacketed reactor heating and cooling circulator

Jacketed reactor heating and cooling circulator mainly consists of reactor, jacket, temperature control equipment, circulation, etc. The reactor is designed with a double-layer glass structure and has good heat resistance and visualization effects. The jacket is located outside the reactor and is connected to the circulation pipe through a flange interface to form a closed circulation system. The temperature control equipment controls the working status of the circulation pump and adjusts the flow and temperature of the medium in the jacket according to the set temperature value, thereby achieving precise control of the internal temperature of the reactor.

Steps

1. Check the equipment: Before use, check whether the jacketed reactor, jacket, circulation pump and other components are intact, whether the interfaces are tight, and whether the pipelines are smooth.

2. Set temperature: According to experimental or production needs, set the required temperature value through the temperature control equipment. Note that the set temperature value should be within the working range of the equipment to avoid damage to the equipment caused by excessively high or low temperatures.

3. Start the circulation pump: Turn on the power of the circulation pump to make the medium in the jacket start to circulate. Note that the rotation speed of the circulation pump should be appropriately adjusted according to the set temperature value and the flow rate of the medium in the jacket to ensure the stability and accuracy of temperature control.

4. Observation and recording: During the heating or cooling process, changes in the temperature inside the reactor should be observed at any time and relevant data should be recorded. If it is found that the temperature fluctuates greatly or cannot reach the expected value, the working status of the temperature control equipment and circulation pump should be checked in time and adjustments should be made accordingly.

5. End the operation: When the experiment or production is completed, the power supply of the circulation pump and temperature control equipment should be turned off. Cleaning and maintenance can only be carried out after the equipment has cooled to room temperature.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: lilia@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

• Temperature range: -120℃ ~ +350℃
• High-precision, intelligent temperature control
• Cooling capacity: 0.5kW ~ 1200kW
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Systems (WTD series)

(Custom Designs)

• （Micro channel / tube reactors specialized）
• Temperature range: -70℃ ~ +300℃
• High-performance circulation pump, more stable temperature control effect
• Wide temperature range to meet the needs of more industries
• Each device is load tested for more than 12 hours

Cooling and Heating Circulators

(Custom Designs)

• Temperature range: -45℃ ~ +250℃
• Emerson Copeland compressor, reliable quality
• Self-diagnosis function, multiple safety protection devices
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Heating Circulators

(Custom Designs)

• Temperature range: +50℃ ~ +300℃
• Large heat exchange area and fast heating speed
• Self-diagnosis function, multiple safety protection devices
• Closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TES Series (Temperature control for fuel and oil testing)

(Custom Designs)

• Temperature range: -85℃ ~ +250℃
• Siemens PLC controller and other brand accessories
• Self-diagnosis function, multiple safety protection devices
• Fully closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TCU Multi-reactors Temperature Control System

(Custom Designs)

• Temperature range: -120℃ ~ +250℃
• Sealed, repeatable temperature control
• Built-in electric heating thermal oil auxiliary system
• Add cold and heat source heat exchange modules according to needs
• Each device is load tested for more than 12 hours

Cooling Chillers                                                                                                     

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Mini Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.