Water Cooled Refrigeration System Chillers

Water Cooled Refrigeration System Chillers

The water cooled refrigeration system uses a water cooling system for heat dissipation, that is to say, it does not need to use a fan? In fact, this understanding is one-sided. According to our experience, the water cooled refrigeration system may also use a fan. In fact, most Most industrial water-cooled equipment must use fans to assist in heat dissipation. Why?

First of all, do you understand the cooling system of the water cooled refrigeration system?

The cooling system is a device for dissipating heat and cooling the condenser of the water cooled refrigeration system, and the system of this equipment cannot only have cooling water. Therefore, the water cooling system must rely on the cooling water tower to work normally, and the natural flow of the cooling water tower dissipates heat, even if there is The filler and water distribution device may also not be able to meet the heat dissipation requirements of the equipment. Therefore, it is necessary to use a fan to perform additional heat dissipation and cooling of the cooling water, or to speed up its heat dissipation and cooling effect.

Secondly, is the fan of the water cooled refrigeration system the same as the air cooling system of the air-cooled chiller?

The principle is the same, but the fan used in the cooling tower of the water-cooled chiller may not be as powerful as the fan of the air-cooled system of the air-cooled chiller, but in terms of operating principle, the two are almost the same , The cooling tower fan of the water cooled refrigeration system will often encounter problems, mainly as follows.

First, the air volume is small.

Like the air cooler, the small air volume is also one of the problems of the cooling tower fan in the water cooling system. There are many reasons for this. For example, the bearing failure mentioned below will also cause the small air volume, but the small air volume is often related to the motor. The transmission belt is related to whether the fan blade is deformed, whether there is too much dust on the fan blade, etc.

Second, bearing failure.

As long as there are fans, there will be bearing failures. The employees responsible for operating and maintaining the water cooled refrigeration system in the enterprise should regularly check the cooling tower fans, add lubricating oil regularly, and clean up possible foreign objects. If the bearings are found to be excessively worn Or if other problems cause bearing damage or operation problems, the relevant parts should be replaced in time, otherwise it will affect the heat dissipation and cooling effect of the cooling water of the cooling tower.

カスタム冷凍機                                                                                                                  

低温チラー (カスタムデザイン)

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (カスタムデザイン)

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー (カスタムデザイン)

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

Chillers for Automotive Battery Test (カスタムデザイン)

車両品質テスト用温度シミュレーション：バッテリー寿命テスト、燃料噴射装置/モーターテストベンチ、エアバッグテスト、コンポーネントテストベンチなど。

温度／圧力／流量を個別に制御可能。

1&2: 2つのグループコントロールのための1つの機械。

温度は一定で、圧力と流量は独立して制御できる。

1&3：3つのグループコントロールのために1つのマシン。

1&6：1台で6グループをコントロール。

半導体 チラー (TES series) (カスタムデザイン)

電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。

半導体 チラー (LTS series) (カスタムデザイン)

電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。

エネルギー貯蔵用チラー(カスタムデザイン)

Liquid Cooling Solutions For Battery Energy Storage Systems

スクリュー冷凍機 (カスタムデザイン)

低温スクリュー冷凍機と常温スクリュー冷凍機