COP (Coefficient Of Performance) of the Chiller

COP (Coefficient Of Performance) of the Chiller

COP (Coefficient Of Performance) is the ratio of energy conversion efficiency. The greater the energy efficiency ratio, the greater the energy savings. In a refrigeration system, the conversion ratio between the amount of cooling produced and the energy consumed is the energy efficiency ratio, also known as the cooling coefficient.

COP refers to the cooling capacity obtained per unit of power consumption. The value of the energy efficiency ratio reflects the refrigeration efficiency of the chiller and is an important technical and economic indicator of the refrigeration system.

COP is the ratio of the cooling capacity that the chiller can achieve to the input power. Under the same working conditions, the larger the ratio, the higher the efficiency and energy saving of the refrigeration system. The larger the cooling performance coefficient, the higher the energy utilization efficiency of the cooling system.

COP is related to the type of chiller, the type of refrigerant and the operating conditions, and the theoretical refrigeration performance coefficient can reach 2.5 to 5.5. Since this parameter is expressed as the ratio of input power and output power in the same unit, it is a dimensionless number.

Common chillers, COP performance parameters are roughly as follows:

1. Air-cooled or evaporative-cooled chillers (piston chillers, scroll chillers):

When the rated cooling capacity is less than or equal to 50KW, its COP should not be less than 2.40;

When the rated cooling capacity is greater than 50KW, its COP should not be less than 2.60;

2. Piston-type and scroll-type chillers (multi-unit equipment):

When the rated cooling capacity is less than 528KW, its COP should not be less than 3.8;

When the rated cooling capacity is 528~1163KW, its COP should not be less than 4.0;

When the rated cooling capacity is greater than 1163KW, its COP should not be less than 4.2;

3. Air-cooled or evaporative-cooled screw chillers:

When the rated cooling capacity is less than or equal to 50KW, its COP should not be less than 2.60;

When the rated cooling capacity is more than 50KW, its COP should not be less than 2.80;

4. Water-cooled screw chiller:

When the rated cooling capacity is less than 528KW, its COP should not be less than 4.10;

When the rated cooling capacity is 528~1163KW, its COP should not be less than 4.30;

When the rated cooling capacity is greater than 1163KW, its COP should not be less than 4.60;

5. Centrifugal chiller:

When the rated cooling capacity is less than 528KW, its COP should not be less than 4.40;

When the rated cooling capacity is 528~1163KW, its COP should not be less than 4.70;

When the rated cooling capacity is greater than 1163KW, its COP should not be less than 5.10.

For COP of special chillers, please contact us!

Eメール info@lneya.com    WeChat ID： +8615251628237    WhatsApp： +86 17851209193

カスタマイズされたソリューション

低温チラー（水冷式・空冷式）

温度制御範囲：-150℃～-5

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (水冷・空冷）

温度制御範囲：-120℃～+30

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー

温度制御範囲+5℃〜+50

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

直接冷却式冷凍機

温度制御範囲：-120℃～-10

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

温度制御範囲：-150℃～-110

お客様のビジネスにカスタマイズされたソリューションを提供します。

スクリュー冷凍機

低温スクリュー冷凍機と常温スクリュー冷凍機

お客様のビジネスにカスタマイズされたソリューションを提供します。