Air Cooled Water Chiller System

Air Cooled Water Chiller System

The air cooled water chiller system is widely used in the global industrial market and is a relatively efficient refrigeration equipment. Although the air cooled water chiller system is equipped with multiple protection devices, these are all to prevent direct damage to the unit in case of failure. If the enterprise wants to ensure high cooling efficiency and long service life of the equipment, it must remember to do regular maintenance and inspection. So, what aspects of an air cooled water chiller system should be checked?

1. Regularly check the compressor

The compressor is the “heart” of the air cooled water chiller system, and its quality directly affects the stability of the chiller in use. The necessary acceptance test for equipment should be carried out in accordance with the principles of air tightness test first, vacuum test second, sub-item test first, and machine test last.

2. Check the stability of voltage and current

When the air cooled water chiller system is working normally, the voltage is 380V (the voltage of DYJ-01A～DYJ-02A is 220V, and the voltage in other foreign regions is also 410V, etc.), and the current is normal within the range of 11A-15A.

3. Regularly check the instrument

The temperature control meter is out of control, replace the temperature control meter. High voltage failure, poor heat dissipation, radiator is too dirty, clean the radiator. Poor ventilation, improve ventilation conditions. The cooling fan does not work, check whether the fan motor is burnt out or short circuited, repair or replace the motor. The high-pressure engine is damaged, replace the high-pressure engine.

4. Regular cleaning

In addition to checking the technical performance of the air cooled water chiller system, care should also be taken to protect the neat appearance of the equipment and the cleanliness of the work site. After the product has been in operation for 6 months, it is necessary to clean the entire system, such as pipes, filters, condensers, fans, etc., especially the fans, like our commonly used fans, are covered with dust and affect heat dissipation, so the cooling efficiency will be directly reduced.

5. Regularly check whether the refrigerant is reduced

Judging by the high pressure and low pressure gauge values on the front of the air cooled water chiller system. When the chiller is running normally, the high pressure is 11-17kg and the low pressure is 3-5kg, which is the normal range. In the shutdown state, both high pressure and low pressure are around 0.6kg.

In addition to the above-mentioned main inspection aspects, it is also necessary to check the oil level and oil temperature of each compressor, check the main power supply voltage and current, and check whether the set value of the chilled water supply temperature is appropriate. If there is a problem, make changes in time.

カスタマイズされたソリューション

低温チラー（水冷式・空冷式）

温度制御範囲：-150℃～-5

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (水冷・空冷）

温度制御範囲：-120℃～+30

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー

温度制御範囲+5℃〜+50

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

直接冷却式冷凍機

温度制御範囲：-120℃～-10

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

温度制御範囲：-150℃～-110

お客様のビジネスにカスタマイズされたソリューションを提供します。

スクリュー冷凍機

低温スクリュー冷凍機と常温スクリュー冷凍機

お客様のビジネスにカスタマイズされたソリューションを提供します。