100 Ton Chiller – Industrial Water Chiller Factory

100 Ton Chiller – Industrial Water Chiller Factory

In summer, many companies need to run chillers 24 hours a day, so the utilization rate is very high. However, after entering autumn and winter, enterprises in some areas no longer need chillers for cooling, but only need to cool through cooling water towers. When the enterprise stops using the 100 ton chiller, it is still necessary to do a good job in the maintenance of the chiller to facilitate the normal operation of the chiller in the next year.

100 ton chiller cleaning steps

1. Turn off the water source of the chiller, and clean up the water inside the equipment components and pipes, so as to avoid the remaining water from corroding the unit components after shutdown, or the temperature is too low to freeze the copper pipes; at the same time, unscrew the drain nut under the water pump to drain the water inside Drain the remaining water to prevent the water system from freezing due to low ambient temperature, the evaporator bursting and causing refrigerant leakage or water pump impeller damage and other failures.

2. Turn off the power of the 100 ton chiller, and check whether each part is worn (if any, it needs to be replaced).

3. Clean the fan of the air-cooled 100 ton chiller and keep it in a clean state.

4. For the water tank of the water tank coil evaporator, check whether there are scales and other debris and remove them.

5. Understand the use of lubricating oil through data records, and regularly replace lubricating oil according to the usage standards to maintain a good lubrication state.

カスタマイズされたソリューション

低温チラー（水冷式または空冷式）

超低温カスケード冷凍技術。

各温度セグメントには、十数種類の製品モデルがあり、その中から選ぶことができる。

循環式チラー水冷または空冷)

閉鎖循環パイプライン、エチレングリコールと水を混合して冷凍する。

室温チラー/小型チラー

高精度冷凍温度制御システム。

直接冷却式冷凍機

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

超低温直接冷却チラーは二次サブクーリング技術を採用し、冷却速度が速い。冷凍システムの冷媒は直接出力され、冷却のためのターゲット制御要素（熱交換器）に蒸発する。