100 Ton Chiller – Industrial Water Chiller Factory

100 Ton Chiller – Industrial Water Chiller Factory

In summer, many companies need to run chillers 24 hours a day, so the utilization rate is very high. However, after entering autumn and winter, enterprises in some areas no longer need chillers for cooling, but only need to cool through cooling water towers. When the enterprise stops using the 100 ton chiller, it is still necessary to do a good job in the maintenance of the chiller to facilitate the normal operation of the chiller in the next year.

100 ton chiller cleaning steps

1. Turn off the water source of the chiller, and clean up the water inside the equipment components and pipes, so as to avoid the remaining water from corroding the unit components after shutdown, or the temperature is too low to freeze the copper pipes; at the same time, unscrew the drain nut under the water pump to drain the water inside Drain the remaining water to prevent the water system from freezing due to low ambient temperature, the evaporator bursting and causing refrigerant leakage or water pump impeller damage and other failures.

2. Turn off the power of the 100 ton chiller, and check whether each part is worn (if any, it needs to be replaced).

3. Clean the fan of the air-cooled 100 ton chiller and keep it in a clean state.

4. For the water tank of the water tank coil evaporator, check whether there are scales and other debris and remove them.

5. Understand the use of lubricating oil through data records, and regularly replace lubricating oil according to the usage standards to maintain a good lubrication state.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 또는 공냉식)

초저온 캐스케이드 냉장 기술.

각 온도 세그먼트에는 선택할 수 있는 12가지 이상의 제품 모델이 있습니다.

재순환 냉각기(수냉식 또는 공냉식)

폐쇄 순환 파이프 라인, 냉장용 물과 혼합된 에틸렌 글리콜.

실온 냉각기/소형 냉각기

고정밀 냉장 온도 제어 시스템.

직접 냉각식 냉동 장비

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

초저온 직접 냉각식 칠러는 2차 과냉각 기술을 채택하여 냉각 속도가 빠릅니다. 냉동 시스템의 냉매가 직접 출력되어 대상 제어 요소(열교환기)로 증발하여 냉각됩니다.