Chiller 70 kw – Water Cooled Chillers and Air Cooled Chillers

Chiller 70 kw – Water Cooled Chillers and Air Cooled Chillers

Now all walks of life are inseparable from chiller equipment, but the energy consumption of chillers is also a considerable expense. The following methods can be used to improve the energy-saving efficiency of a 70 kw chiller.

Energy saving method of 70 kw chiller

1. To strengthen the operation management of the chiller equipment, it is recommended to adopt a statistical system for the electricity consumption and energy consumption of the 70 kw chiller, so as to facilitate the assessment of electricity consumption and material consumption, appropriately increase the necessary measuring instruments and appliances, and carry out energy saving and technical transformation work .

2. Under the premise of meeting the requirements of equipment safety and safe production, reduce the condensation temperature and increase the evaporation temperature as much as possible. Therefore, the transformation of the cooling water tower has also been increased to ensure the efficiency of the equipment.

3. Adjust the operating load of the 70 kw chiller. Under the condition of ensuring the safe operation of the equipment, the chiller operates at 70%-80% load than when it operates at 100% load, and the power consumption per unit cooling capacity is smaller. When using this operation mode to start up, it should be considered comprehensively in combination with the conditions of the cooling water tower and the water pump.

4. If the water treatment technology is not done well, it will lead to the deposition of dirt on the pipes, which will reduce the heat exchange efficiency and affect the heat exchange efficiency of the condenser and evaporation, and the electricity cost of the 70 kw low-temperature chiller will be greatly increased during operation. promote.

Customized Solutions For Your Business

Low Temperature Chillers (Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

Recirculating Chillers (Custom Designs)

Our recirculating chiller adopts low-temperature refrigeration technology, the temperature is as low as -120℃, and various accessories are customizable.

Room Temperature Chillers / Small Chillers (Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Direct Cooling Type Refrigeration Equipments (Custom Designs)

It is suitable for places with small heat exchange area and large heat exchange.

Chillers for Automotive Battery Test (Custom Designs)

Temperature simulation for vehicle quality test: battery life test, fuel injector/motor test bench, airbag test, component test bench, etc.

Temperature / Pressure / Flow can be independently controlled.

1&2: one machine for two groups control.

Temperature remains constant, pressure / flow can be independently controlled.

1&3: one machine for three groups control.

1&6: one machine for six groups control.

Semiconductor Chillers (TES series) (Custom Designs)

Suitable for precise temperature control of electronic components. In the manufacture of semiconductor electronic components for harsh environments, the IC packaging assembly and engineering and production testing phases include electronic thermal testing and other environmental testing simulations.

Semiconductor Chillers (LTS series) (Custom Designs)

Suitable for precise temperature control of electronic components. In the manufacture of semiconductor electronic components for harsh environments, the IC packaging assembly and engineering and production testing phases include electronic thermal testing and other environmental testing simulations.

Chillers for Energy Storage(Custom Designs)

Liquid Cooling Solutions For Battery Energy Storage Systems

Screw Chillers (Custom Designs)

Low temperature screw chillers and room temperature screw chillers