Laboratory Heating Cooling Thermostat

Laboratory heating cooling thermostat is a mechanical refrigeration and heating equipment widely used in scientific research, biology, physics, medicine, chemical industry and other fields. Our company has many series (SUNDI, HRT, KRY, TES, etc.) and different models of laboratory heating cooling Thermostats have different parameters such as temperature range, temperature control accuracy, weight, and size.

Introduction to laboratory heating cooling thermostat

Laboratory heating cooling thermostat consists of compressor, condenser, expansion valve, heat exchanger, temperature controller, circulation pump, pre-cooling unit, heating unit, refrigeration unit and other accessories. Each component has its own role and advantages. When the space is relatively small, the operating power of the equipment can be appropriately reduced. Choosing the appropriate operating power of the laboratory heating cooling thermostat can reduce the probability of equipment failure and help extend the service life of the equipment. .

The working principle of a laboratory heating cooling thermostat is that a pump drives the heat transfer medium (usually water or oil) from a water tank equipped with a built-in heater and cooler to the reactor, and then from the reactor back to the water tank. The controller adjusts the temperature of the thermal fluid and the temperature of the reactor according to the temperature of the thermal fluid measured by the temperature sensor or/and the internal temperature of the reactor.

How to choose laboratory heating cooling thermostat?

1. Laboratory heating cooling thermostats have some special models, such as isolation and explosion-proof models, each with different characteristics. You can choose a specific model according to your own needs. Of course, you can also choose or customize a model to meet your own requirements. Choosing a suitable heating cooling thermostat can not only be put into use quickly, but also cause no waste.

2. Laboratory heating cooling thermostats have different temperature ranges, different models, and different heat transfer media.

3. Laboratory heating cooling thermostats all use PID control technology to compensate for various factors that affect the reactor temperature. When selecting equipment, heating power, media circulation pressure and flow rate should also be considered. Different raw materials have different processing characteristics.

4. Laboratory heating cooling thermostat consists of refrigeration cycle system, heating cycle system and automatic control system. For areas where the equipment has explosion-proof requirements, a positive pressure explosion-proof box can be customized, which not only meets the explosion-proof requirements, but also reduces the use of explosion-proof components and reduces the production cost of the entire machine.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: lilia@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

• Temperature range: -120℃ ~ +350℃
• High-precision, intelligent temperature control
• Cooling capacity: 0.5kW ~ 1200kW
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Systems (WTD series)

(Custom Designs)

• （Micro channel / tube reactors specialized）
• Temperature range: -70℃ ~ +300℃
• High-performance circulation pump, more stable temperature control effect
• Wide temperature range to meet the needs of more industries
• Each device is load tested for more than 12 hours

Cooling and Heating Circulators

(Custom Designs)

• Temperature range: -45℃ ~ +250℃
• Emerson Copeland compressor, reliable quality
• Self-diagnosis function, multiple safety protection devices
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Heating Circulators

(Custom Designs)

• Temperature range: +50℃ ~ +300℃
• Large heat exchange area and fast heating speed
• Self-diagnosis function, multiple safety protection devices
• Closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TES Series (Temperature control for fuel and oil testing)

(Custom Designs)

• Temperature range: -85℃ ~ +250℃
• Siemens PLC controller and other brand accessories
• Self-diagnosis function, multiple safety protection devices
• Fully closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TCU Multi-reactors Temperature Control System

(Custom Designs)

• Temperature range: -120℃ ~ +250℃
• Sealed, repeatable temperature control
• Built-in electric heating thermal oil auxiliary system
• Add cold and heat source heat exchange modules according to needs
• Each device is load tested for more than 12 hours

Cooling Chillers                                                                                                     

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Mini Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.