Water Chiller Cooling System

Water Chiller Cooling System

Under the long-term use of the water chiller cooling system, some failures will inevitably occur. In fact, when we use it, we need to carry out regular maintenance on it to avoid failures and affect the production of factories and enterprises. Regular inspection of the water chiller cooling system can not only improve its lifespan, but also ensure that the production schedule of the production enterprise will not be affected.

1. Compressor inspection

As a precision component in the water chiller cooling system, the compressor also determines the performance of the chiller. If you do not check and maintain it, it will easily break down, and the maintenance cost of the compressor is extremely high. In order to avoid failure, it needs to be inspected and maintained regularly.

2. Dry filter inspection

The dry filter is to filter out the moisture in the water chiller cooling system, so as to avoid the occurrence of moisture in the chiller and cause damage to the system. Therefore, regular maintenance of the dry filter is also very important. It is recommended that you conduct an inspection at least once a year, and if it is used in a harsh environment, it is recommended to inspect it every six months.

3. Safety valve inspection

The safety valve plays the role of automatic pressure relief in the water chiller cooling system. Regularly check whether the safety valve is aging or malfunctioning.

4. Lubricating oil inspection

Lubricating oil works in the water chiller cooling system for a long time, and the oil quality will naturally deteriorate, so the lubricating oil needs to be replaced regularly.

5. Blockage inspection

Condensers, evaporators, and pipelines are prone to scale formation after a long time of operation, causing impurity pollution and damage to the water chiller cooling system, so check the blockage regularly and clean it up in time.

カスタマイズされたソリューション

低温チラー（水冷式・空冷式）

温度制御範囲：-150℃～-5

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (水冷・空冷）

温度制御範囲：-120℃～+30

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー

温度制御範囲+5℃〜+50

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

直接冷却式冷凍機

温度制御範囲：-120℃～-10

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

温度制御範囲：-150℃～-110

お客様のビジネスにカスタマイズされたソリューションを提供します。

スクリュー冷凍機

低温スクリュー冷凍機と常温スクリュー冷凍機

お客様のビジネスにカスタマイズされたソリューションを提供します。