Small Recirculating Water Chiller Manufacturer

Small Recirculating Water Chiller

It is important to have a high-quality small recirculating water chiller, but using proper skills in the process of using the chiller may make your work more effective. We have sorted out the user’s skills in the process of using small recirculating water chiller for you, hoping to provide some valuable suggestions.

After purchasing a small recirculating water chiller, pay attention to the installation of the equipment, which will greatly improve the performance of the industrial chiller. First check whether the machine is in good condition, whether the installation site is empty, and whether the location is suitable. A suitable and sufficient space should be selected to facilitate the normal operation and future maintenance of the small recirculating water chiller. Hard cement ground is recommended for installation, plus installation pads. The installed ground cement is about 50mm thick and can bear the operating weight of the equipment.

Small recirculating water chiller should be installed at a room temperature between 5°C and 35°C. There is no shelter around and above the equipment, and enough space should be left for smooth ventilation and normal operation of the equipment. The pipe installation space should also be sufficient, and the connecting part of the pipe can use door openings or other openings in suitable positions. The water in the room should be unobstructed. Appropriate pipe diameters should be selected for water pipes to ensure the flow and pressure of the cooling system and cold water system when the small recirculating water chiller is running at maximum power, and to ensure the correct connection between pipe fittings.

The reasonable utilization efficiency of small recirculating water chiller is the main method to improve utilization efficiency. When using the product, the cooling water capacity should be reasonably selected, or the operating speed should be adjusted. The load experiment shows that under the condition of ensuring the safe operation of the refrigeration equipment, when the equipment operates at a load of 70%-80%, the power consumption per unit cooling capacity is the smallest.

Reducing the condensation temperature of small recirculating water chiller is an important way to improve refrigeration efficiency. Under the premise of meeting the operation, installation and refrigeration requirements, try to increase the evaporation temperature and reduce the condensation temperature. For example, when installing a water-cooled small recirculating water chiller, there must be a certain margin when selecting a matching industrial cooling tower. At the same time, comprehensively consider the operation of pipeline water pumps and cooling towers, and increase the transformation of the original cooling tower circulating water system to ensure the cooling efficiency of cooling water.

Avoiding and reducing the scaling of pipes in the small recirculating water chiller can improve the heat exchange efficiency of the condenser and evaporator. When the equipment is running for a long time, if the cooling water and chilled water in the system are not properly disposed of, calcium bicarbonate and magnesium bicarbonate in the circulating water will produce calcium carbonate and magnesium carbonate, which will accumulate on the pipe wall of the pipe or heat exchanger. Decrease the thermal conductivity, affect the heat exchange efficiency of the condenser and evaporator, and increase the power consumption of the equipment. Therefore, when we use the small recirculating water chiller, we should use the corresponding technology to treat the water, and regularly descale and clean the water system pipes and cooling towers to improve the heat exchange efficiency.

カスタム冷凍機                                                                                                                  

低温チラー (カスタムデザイン)

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (カスタムデザイン)

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー (カスタムデザイン)

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

Chillers for Automotive Battery Test (カスタムデザイン)

車両品質テスト用温度シミュレーション：バッテリー寿命テスト、燃料噴射装置/モーターテストベンチ、エアバッグテスト、コンポーネントテストベンチなど。

温度／圧力／流量を個別に制御可能。

1&2: 2つのグループコントロールのための1つの機械。

温度は一定で、圧力と流量は独立して制御できる。

1&3：3つのグループコントロールのために1つのマシン。

1&6：1台で6グループをコントロール。

半導体 チラー (TES series) (カスタムデザイン)

電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。

半導体 チラー (LTS series) (カスタムデザイン)

電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。

エネルギー貯蔵用チラー(カスタムデザイン)

Liquid Cooling Solutions For Battery Energy Storage Systems

スクリュー冷凍機 (カスタムデザイン)

低温スクリュー冷凍機と常温スクリュー冷凍機