KRYCH-7.5 -40°C ~ +100°C Battery Test High & Low Temperature Box
- Temperature Control Range: -40°C ~ +100°C (Custom Designs)
- Emerson/Danfoss Dry Filter, Oil Separator, etc.
- Inverter Compressor
注:空冷と水冷の両方が利用可能です。 防爆キャビネットはカスタマイズすることができます。
Phone: +86-18806176058
検索 すべて検索
注:空冷と水冷の両方が利用可能です。 防爆キャビネットはカスタマイズすることができます。
The double-layer high and low temperature box is mainly used for high and low temperature test devices for explosive samples. It is currently mainly used in the new energy battery industry. It can directly complete high and low temperature charge and discharge tests for battery cells, modules, and PACKs in the test box. There are also functions such as high and low temperature storage. In the case of test battery failure, explosion-proof pressure relief and fire protection devices are added.
1. Adopt the upper and lower double-layer box design, the box contains antifreeze battery cooling system, the control and test systems of the two boxes are completely independent operation;
2. The box door and the pressure relief port are equipped with explosion-proof chains;
3. The interior of the box is designed with all stainless steel and full welding, which can meet the storage requirements of 0.5m fire water;
4. The insulation layer of the box body is designed to be 100mm thick, and it is composed of insulation materials with low thermal conductivity and high temperature resistant materials, which can meet the requirements of -40°C to 100°C; meet the long-term high and low temperature impact requirements;
5. Each box is equipped with an explosion-proof pressure relief port, which automatically releases pressure when overpressure is sensed;
6. The refrigeration system adopts frequency conversion control, combined with hot gas and electric heating control algorithm, operates efficiently and saves energy by more than 200%.
Eメール info@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
モデル | KRYCH-7.5W/7.5 | ||
温度範囲 | -40℃~100℃ antifreeze | -40℃~100℃ test chamber | |
Antifreeze Flow Control | 1L/min~25L/min ±0.2L/min | / | |
Antifreeze Pressure | Measure and display the inlet and outlet pressure and display the pressure on the touch screen | ||
Chamber volume | Inside the upper box:2200*3220*1200mm Inside the lower box:2200*3220*1100mm | ||
暖房能力 | 7.5kW antifreeze | 14kW test chamber | |
冷却能力 | 135℃ | 7.5kW | |
20°℃ | 7.5kW | ||
0℃ | 7.5kW | ||
-20℃ | 4.5kW | ||
-35℃ | 1.8kW | ||
test chamber | Heating rate | 25~+100℃≥±2℃/Min | |
cooling rate | 25~-40℃≥1℃/Min | ||
Antifreeze Temp Control Accuracy | ±0.5℃ | ||
High & low temperature chamber temperature uniformity | ≤2℃ | ||
Circulation Air Volume | 5000m3/h | ||
コントローラー | PLC controller, fuzzy PID control algorithm | ||
コミュニケーション | CAN | ||
Device Internal Temperature Feedback | The internal temperature of the equipment box, the condensation temperature of the refrigeration system, the suction temperature of the compressor, and the cooling water temperature (with water cooling equipment) | ||
高温冷却モジュール | Cooling from a high temperature of 100°C | ||
循環ポンプの流量、圧力 | マグネットポンプ | ||
Power supply 380V50HZ | Distribution main air switch model: EZD250E4225ELN | ||
Dimensions mm | 2400*5600*2850 | ||
コンプレッサー | Inverter compressor | ||
蒸発器 | プレート式熱交換器 | ||
冷凍アクセサリー | Emerson/Danfoss brand dry filter, oil separator, etc. | ||
スロットル・モード | 電子膨張弁 | ||
操作パネル | 10-inch color touch screen, temperature curve displayEXCEL data export | ||
冷媒 | R125/R507C/R404A | ||
Protection | Phase sequence and phase failure protector, refrigerator overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions. | ||
Internal reserved antifreeze interface | ZG3/4 | ||
Water cooled condenser | Jacket/shell and tube heat exchanger | ||
Cooling water @20°C | 25m3/H | ||
Load bearing of inner bottom plate (tons) | 1.5 | ||
Weight (tons) | 4.6 | ||
Fulfill the standard | GB/T 2423.1-2008 Test A: Low temperature test method | ||
GB/T 2423.2-2008 Test B: Low temperature test method | |||
GJB 150.3A-2009 High temperature test method | |||
GJB 150.4A-2009 High temperature test method |
Eメール info@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
モデル | KRYCH-7.5W/7.5 | ||
温度範囲 | -40℃~100℃ antifreeze | -40℃~100℃ test chamber | |
Antifreeze Flow Control | 1L/min~25L/min ±0.2L/min | / | |
Antifreeze Pressure | Measure and display the inlet and outlet pressure and display the pressure on the touch screen | ||
Chamber volume | Inside the upper box:2200*3220*1200mm Inside the lower box:2200*3220*1100mm | ||
暖房能力 | 7.5kW antifreeze | 14kW test chamber | |
冷却能力 | 135℃ | 7.5kW | |
20°℃ | 7.5kW | ||
0℃ | 7.5kW | ||
-20℃ | 4.5kW | ||
-35℃ | 1.8kW | ||
test chamber | Heating rate | 25~+100℃≥±2℃/Min | |
cooling rate | 25~-40℃≥1℃/Min | ||
Antifreeze Temp Control Accuracy | ±0.5℃ | ||
High & low temperature chamber temperature uniformity | ≤2℃ | ||
Circulation Air Volume | 5000m3/h | ||
コントローラー | PLC controller, fuzzy PID control algorithm | ||
コミュニケーション | CAN | ||
Device Internal Temperature Feedback | The internal temperature of the equipment box, the condensation temperature of the refrigeration system, the suction temperature of the compressor, and the cooling water temperature (with water cooling equipment) | ||
高温冷却モジュール | Cooling from a high temperature of 100°C | ||
循環ポンプの流量、圧力 | マグネットポンプ | ||
Power supply 380V50HZ | Distribution main air switch model: EZD250E4225ELN | ||
Dimensions mm | 2400*5600*2850 | ||
コンプレッサー | Inverter compressor | ||
蒸発器 | プレート式熱交換器 | ||
冷凍アクセサリー | Emerson/Danfoss brand dry filter, oil separator, etc. | ||
スロットル・モード | 電子膨張弁 | ||
操作パネル | 10-inch color touch screen, temperature curve displayEXCEL data export | ||
冷媒 | R125/R507C/R404A | ||
Protection | Phase sequence and phase failure protector, refrigerator overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions. | ||
Internal reserved antifreeze interface | ZG3/4 | ||
Water cooled condenser | Jacket/shell and tube heat exchanger | ||
Cooling water @20°C | 25m3/H | ||
Load bearing of inner bottom plate (tons) | 1.5 | ||
Weight (tons) | 4.6 | ||
Fulfill the standard | GB/T 2423.1-2008 Test A: Low temperature test method | ||
GB/T 2423.2-2008 Test B: Low temperature test method | |||
GJB 150.3A-2009 High temperature test method | |||
GJB 150.4A-2009 High temperature test method |
カスタム・オプション
ポータブル、コンパクト、大型、小型の冷凍機など、お客様のご要望に応じてカスタム設計いたします。
何トンのチラーが必要であっても、私たちは最適なソリューションをご提案します。
私たちは-150℃から+350℃までの温度に対応するカスタムソリューションを作ることができます。
特定の産業向けのカスタム温度範囲。
私たちは、様々な産業向けに非常に幅広い冷却能力を提供しています。
空冷式、水冷式、蒸発凝縮式など、さまざまな冷凍タイプのチラーを提供しています。
冷凍コンプレッサーの種類にかかわらず、お客様のご要望に応じて設計いたします。
コンプレッサー、エバポレーター、熱交換器、循環ポンプ、コントローラー、膨張弁、シェル素材など、国際的に有名な様々なアクセサリーを使用し、すべてお客様のニーズに合わせてカスタマイズすることができます。
ニーズに合わせてチラーの電圧と位相をカスタマイズできます。
任意 110V/60HZ、220V/60HZ、380V/50HZ、220V/50HZ、400V/50HZ、460V/60HZ、440V~480V/60HZ、等。
当社の強み
我々は提供する:
信頼できる経験
当社は20年以上にわたり、カスタム製品の設計・製造を行ってきました。医療用冷凍機からエネルギー貯蔵用冷凍機まで、あらゆる業界、あらゆる用途の製品を製造してきました。
当日見積もり
今すぐお見積もりを最短30分でお見積もりいたします。
年中無休のカスタマーサービス
私たちはいつでもお客様のためにここにいます。ご質問でもお見積もりでも、24時間365日、常に誰かがお客様とコミュニケーションをとっています。
耐久性と信頼性の高い機器
当社の製品はプレミアムグレードの材料で作られており、すべてのカスタム製品に競争力のある保証を提供しています。
Eメール info@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
著作権情報はlneya-online.comに帰属します。詳細はメールにてお問い合わせください: lilia@lneya.com
または、下記のWhatsAppまたはWeChatのQRコードをスキャンしてお問い合わせください。
WhatsAPP WeChat