How to Choose a Material Aging Hot and Cold Test System?

2022/07/28 分類業界ニュース 250

How to Choose a Material Aging Hot and Cold Test System?

The selection of refrigeration and heating equipment for material aging test should meet the requirements of host parameters and on-site working conditions.

1. When performing cooling and heating temperature control, the supporting equipment controls the temperature to reach the expected temperature range. This whole process will cause a certain chemical reaction to generate heat, and this reaction process is easily affected by the outside world. Therefore, the placement environment is more important, and it is recommended to choose a ventilated and cool room for placement.

2. A series of exothermic reactions and endothermic reactions will occur in the matching reaction kettle during the polymerization reaction. During the chemical reaction, it is recommended that the surrounding operators do not get too close to avoid certain troubles. During the reaction, if the heat is not removed in time, the reflected pressure will be affected. If the pressure is too high, the entire reaction will be in a certain danger.

3. Material aging test High temperature and low temperature equipment can determine the heating power and pump power according to the actual production process to avoid the phenomenon of excessive or insufficient power. According to the customer’s production process, various special models of cooling and heating integrated machines, explosion-proof types, etc. are formulated.

4. The actual reaction process is often accompanied by a strong exothermic effect, which changes the reaction temperature. According to the characteristics of temperature control of the reactor, the high temperature and low temperature equipment for material aging test developed by LNEYA is used to control the automatic temperature control device of the reactor. Through the online learning function of the neural network, the automatic adjustment and self-adaptation ability of the system is enhanced, so that the constant temperature control of the reactor can be achieved. more stable.

5. Material aging test High temperature and low temperature equipment can be matched with reaction kettles of different sizes for cooling and heating temperature control. Due to the different heat capacities brought by different sizes of reaction kettles, their ability to absorb or release heat is also different.

6. It can control one or more reactors at the same time. It is a large system device with integrated temperature control, which can be produced according to the requirements of the working conditions.

私たちは、最高級のオンタイムデリバリーをお約束温度制御機器プロンプトが表示さに裏打ちされ、慎重アフターサービス。ご相談ください詳細はこちら！