2 in 1 Heater and Cooler

2 in 1 Heater and Cooler

2 in 1 heater and cooler is an intelligent temperature control integrated machine for fluid temperature control. It is also called high and low temperature integrated machine, refrigeration and heating integrated machine, etc. on the market. It is often used with a reaction kettle for cooling, heating, and temperature control. The temperature control equipment integrated with heating, the heat transfer medium is water or heat transfer oil, and the cooling medium is ethylene glycol, water, etc.

First, the working principle of 2 in 1 heater and cooler:

The 2 in 1 heater and cooler is an auxiliary machine, which is used with various instruments and equipment. The inlet and outlet of the heating equipment are connected with the customer equipment for temperature control. There is a heat exchanger on the side of the cooling system to perform indirect heat exchange for the heating equipment to achieve the purpose of cooling. The medium cools down and then exchanges heat with the client to start cooling down the temperature of the client device. This is a cycle. The equipment is equipped with a computer control panel, which is convenient and simple to operate, and has high temperature control accuracy and is widely used. It not only has a heating function, but also can cool down, which can shorten the production cycle and improve production efficiency.

2 in 1 heater and cooler with water as the medium. During the period, the equipment is heated for the customer to increase the temperature for production. When cooling is required, the cooling solenoid valve is opened, and the cooling circulating water enters and the hot water is taken away. The cold water enters and directly cools the effect. Part of the hot water squeezed in is cooled and recirculated, so as to meet the working requirements of equipment cooling.

Second, the selection considerations for 2 in 1 heater and cooler:

When choosing a 2 in 1 heater and cooler, customers must be very clear about their process requirements. The temperature range of the equipment is different. For example, the equipment above normal temperature is different from the equipment involving sub-zero temperature. The temperature can be divided into low temperature and ultra-low temperature, and the temperature above zero can be divided into high temperature and high temperature. In this way, there are many combinations of temperature ranges for 2 in 1 heater and cooler, and different combinations have different technical requirements. This Professional technical service is required.

On the other hand, the 2 in 1 heater and cooler can be distinguished from the different media, which can be oil equipment, water equipment, or mixed equipment, and the design ideas will be different for different media.

カスタマイズされたソリューション

冷暖房システム (SUNDIシリーズ)

温度制御範囲：-120°C～+350°C

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、自動車産業、半導体および電気テスト、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学およびその他の産業。

冷暖房システム（WTDシリーズ）

（マイクロチャンネル・チューブリアクター特化型）

温度制御範囲：-70℃～+300

マイクロ流路に特化した設計（液体保持容量が小さく、熱交換容量が大きく、循環システムの圧力損失が高い）

冷暖房システム (TESシリーズ)

温度制御範囲: -85°C ~ +250°C

温度制御精度： ± 0.3°C

冷却・加熱装置（LTSシリーズ）

温度制御範囲：-80°C～+80°C

半導体プロセスにおいて、反応チャンバー、ホットシンクプレート、不燃性熱媒体の温度制御に広く使用されています。

冷暖房サーキュレーター

温度制御範囲：-45℃～+250

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学、その他の産業。

加熱サーキュレーター

温度制御範囲+50℃〜+300

注：UCシリーズは熱媒体の温度を制御することができる。USTシリーズは熱媒の温度を制御できるだけでなく、反応材料の温度も制御できます。

TCU マルチリアクター温度制御システム

温度制御範囲：-120°C～+250°C

用途各種リアクター（マイクロチャンネル、ガラス、ジャケット付きリアクターなど）、蒸留または抽出システム、研究室、大学、研究所、航空宇宙、化学、製薬、石油化学、生化学、医療、病院、研究開発ワークショップ、航空宇宙、生物学、その他の産業。