Heating and Cooling Chillers

Contact us today for the perfect temperature control solution

Heating and cooling chillers are a new type of temperature control product that integrates multiple functions such as cooling, heating and constant temperature. Compared with single-function products such as traditional air conditioners, it can better save energy and reduce environmental pollution.

The principle of heating and cooling chillers

Heating and cooling chillers use a refrigeration cycle system, which uses a compressor, evaporator, condenser, throttling device and control system. In cooling mode, the heat of the equipment or space is discharged through the condenser and cold air is blown out at the same time, thus achieving the effect of Cooling effect. In the heating mode, a combination of compressor, evaporator, condenser, expansion valve, heater, etc. is used to absorb the heat of the equipment or environment through the indoor unit, and then compress it into high-temperature and high-pressure gas. After dissipating heat through the evaporator, Then the hot gas is released through the heat exchanger to achieve high temperature.

This kind of circulation system generally uses heat pump technology. Heat pumps use the natural temperature differences of air, water, underground water, etc. to absorb heat from low-temperature environmental media, compress and increase the temperature, and release the high-temperature heat to the room or equipment that needs to be heated. Heat pumps can be said to be a new energy-saving heating method because they use natural energy and require very little electricity. Only a small part of the electric energy is needed to drive the compressor to complete the entire cycle process. Therefore, heating and cooling chillers are highly efficient and Energy saving, environmental protection and other characteristics.

Functions of heating and cooling chillers

1. Refrigeration function: When the equipment or room is in a high-temperature environment, the equipment or outdoor air can be sucked in through the condenser, compressed by the compressor, and turned into a high-temperature and high-pressure gas, which is then diffused through the expansion valve, and the heat is then exchanged through the evaporator. discharge the device to the outdoors.

2. Heating function: Diffuse high-temperature equipment or indoor air to the evaporator of the outdoor unit through the expansion valve, so that the heat absorbs outdoor heat through the evaporator to form high-temperature and high-pressure gas, which can then release heat energy through the heat exchanger.

3. Hot water supply function: During the use of heating and cooling chillers, waste heat and other energy sources can also be used to provide users with hot water supply through accessories such as gas water heaters and solar water heaters.

4. Dehumidification and purification function: In severely humid and humid environments, the effect of dehumidifiers is more obvious. Not only can it quickly dehumidify, it can also purify indoor air through the high-efficiency filter equipped with the indoor unit, removing bacteria, viruses, ozone, dust and other harmful substances.

Advantages of heating and cooling chillers

1.Double effect

As a new type of product with both heating and cooling functions, heating and cooling chillers have dual functions. They are not only easy to use, but also have great advantages in economic benefits.

2. High efficiency, energy saving, environmental protection and health

Heating and cooling chillers are one of the most efficient temperature control methods in the world. They use the natural temperature difference of the air to not only greatly reduce the production of pollutants in the air, but also to significantly reduce indoor temperature and indoor humidity.

3. Various types

The appearance styles of heating and cooling chillers are rich and diverse, which not only can meet the needs of various industrial designs, but also are suitable for different manufacturers’ structures. Its compact design is very suitable for the needs of most manufacturers.

4. Low cost of use

Heating and cooling chillers have the advantages of high efficiency, energy saving and environmental protection, and their use cost is much lower than other single temperature control equipment.

In summary, heating and cooling chillers not only have dual functions, but also have the advantages of easy installation, energy saving, environmental protection, and low cost of use.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products up to 900 tons. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

Temperature Control Range: -120°C to +350°C

cooling and heating thermostat, widely used in various industry.

Cooling and Heating Systems (WTD series)

(Custom Designs)

（Micro channel / tube reactors specialized）

Temperature Control Range: -70°C to +300°C

Specialized design for micro channel (small liquid holding capacity, strong heat exchange capacity, circulation system high pressure drop)

Cooling and Heating Circulators

(Custom Designs)

Temperature Control Range: -45°C to +250°C

Heating Circulators

(Custom Designs)

Temperature Control Range: +50°C to +300°C

Note: UC series can control the temperature of heat transfer medium. UST series can not only control the temperature of the heat transfer medium, but also control the temperature of the reaction material.

TES Series

(Custom Designs)

Temperature Control Range: -85°C to +250°C

LTS Series (Fluorinated Liquid) 

(Custom Designs)

Temperature Control Range: -80°C to +80°C

TCU Multi-reactors Temperature Control System

(Custom Designs)

Temperature Control Range: -120°C to +250°C

Cooling Chillers                                                                                                     

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Water Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.