Heater Chiller Circulator

Heater Chiller Circulator

The use effect and operation process of the heater chiller circulator are inseparable from the pre-installation and environmental factors. When using the heater chiller circulator, you also need to pay attention to some precautions.

First, the installation precautions of the heater chiller circulator:

1. The heater chiller circulator has certain conditions for the environment. It is recommended to place it on a firm, stable, level ground with a certain amount of space around it to facilitate the heat dissipation of the equipment, as well as for later repairs or maintenance.

2. The power supply of the heater chiller circulator generally uses three-phase four-wire. If there is an unconventional model, you need to pay attention to distinguish it. Prepare the power supply, zero connection, grounding and other lines in advance to ensure that the connection is tight.

3. Equipped with various overload protections, do not modify it by yourself to cause malfunction.

4. When the heater chiller circulator is being hoisted, care must be taken on site not to cause the equipment to be impacted and damage the display screen while moving.

5. Pay attention to avoid places with dangerous flammable gases and places with acid solutions, and avoid the influence of high-frequency equipment products.

6. The heater chiller circulator should be placed in a dry environment to avoid equipment damage due to high ambient temperature.

Second, precautions for using the heater chiller circulator:

1. The heater chiller circulator will be issued with a product manual when it leaves the factory. Users need to have a certain understanding of the various interfaces, buttons, and screens around the device before operating it. During the use of the equipment, it is necessary to use it strictly in accordance with the equipment manual, and operate according to the use and maintenance, otherwise it will affect the service life of the equipment.

2. Before using the heater chiller circulator, it is necessary to check whether the equipment is in a normal state, and it is necessary to formulate a maintenance plan.

3. When selecting the heat transfer medium of the heater chiller circulator, it is necessary to pay attention to whether its temperature range meets the requirements of the working conditions of the project and whether it is suitable for the use of the equipment. The heat conduction medium needs to be replaced regularly after long-term use. It is recommended to use the same type of medium to avoid equipment blockage caused by heat conduction medium of different models and different brands.

4. There are many types of pipes in the heater chiller circulator. Choose which material is suitable according to the temperature requirements of the equipment model, and then choose according to the length and diameter. It is necessary to regularly check the consumption of the pipes, check whether there is damage, and replace them in time.

Maßgeschneiderte Lösungen für Ihr Unternehmen

Kühl- und Heizsysteme (Serie SUNDI)

Temperaturregelbereich: -120°C bis +350°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Automobilindustrie, Halbleiter- und Elektrotests, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Kühl- und Heizsysteme (WTD-Serie)

（Mikrokanal / Röhrenreaktoren spezialisiert）

Temperaturregelbereich: -70°C bis +300°C

Spezielles Design für Mikrokanäle (geringe Flüssigkeitsspeicherkapazität, starke Wärmeaustauschkapazität, Zirkulationssystem mit hohem Druckabfall)

Kühl- und Heizsysteme (TES-Serie)

Temperaturregelbereich: -85°C ~ +250°C

Temperaturregelungsgenauigkeit: ± 0,3°C

Kühl- und Heizmaschinen (LTS-Serie)

Temperaturregelbereich: -80°C bis +80°C

Es wird häufig in der Halbleiterindustrie eingesetzt, um die Temperatur der Reaktionskammer, der Heizplatte und des nicht brennbaren Wärmeträgers zu regeln.

Umwälzpumpen für Kühlung und Heizung

Temperaturregelbereich: -45°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Heizungsumwälzpumpen

Temperaturregelbereich: +50°C bis +300°C

Hinweis: Die UC-Serie kann die Temperatur des Wärmeträgermediums regeln. Die UST-Serie kann nicht nur die Temperatur des Wärmeträgermediums, sondern auch die Temperatur des Reaktionsmaterials regeln.

TCU Multireaktoren Temperaturkontrollsystem

Temperaturregelbereich: -120°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.