Air Cooled Chiller Refrigeration Cycle System

Contact us today for the perfect temperature control solution

 

Air cooled chiller refrigeration cycle system is a common refrigeration equipment. Its working principle is based on the principle of refrigeration cycle system and air flow. In the refrigeration cycle, the fluid absorbs and releases heat through processes such as compression, condensation, expansion, and evaporation to achieve refrigeration. In an air-cooled chiller, air is used as the condensing medium, and the heat released by condensation is taken away by forced air flow.

Specifically, the air cooled chiller refrigeration cycle system consists of a compressor, condenser, evaporator and control system. Among them, the compressor sucks in low-temperature and low-pressure refrigerant, compresses it into high-temperature and high-pressure gas, and then sends it to the condenser. In the condenser, the refrigerant exchanges heat with the air, releasing heat into the air while the refrigerant is condensed into a liquid. Next, the refrigerant is throttled through the expansion valve, the pressure and temperature are reduced, and then enters the evaporator, where it exchanges heat with the cold water, thereby cooling the cold water. Finally, the refrigerant is sucked into the compressor and the cycle repeats.

 

 

Features of air cooled chiller refrigeration cycle system

1. Stable performance: Multiple compressors are used in parallel. Each compressor has its own independent refrigeration circuit, that is, the evaporator and condenser are also completely independent; all compressors are commanded by a unified microcomputer control system to turn on and off one by one. , will never interfere with each other, and all machines of this brand are made with original equipment, so the failure rate of a single machine is extremely low. ​

2. Power saving and energy saving: multiple small and medium-power compressors are used in parallel, which will cause minimal interference to the power grid when turning on and off. As the load changes, the unit will automatically determine the number of startups to ensure that the compressors that are turned on are in good working condition. , thereby effectively saving electric energy. ​

3. Long service life: The evaporator and condenser are very reasonably designed and placed above the compressor. During the entire operation, most of the lubricating oil always stays in the compressor, ensuring good lubrication of the compressor.

Protection device for air cooled chiller refrigeration cycle system

1 Phase loss and reverse phase protection device;

2. Motor overload protection device;

3. High and low pressure pressure protection devices;

4. Automatic alarm device for water shortage;

5. Low temperature and anti-icing protection device.

 

 

Application fields of air cooled chiller refrigeration cycle system

The main application industries of air cooled chiller refrigeration cycle system are laser technology, welding plastic molding, injection molding, extrusion molding, bottle blowing, thermoplastic mechanical cutting processing, non-cutting processing, casting surface treatment, electroplating, electrophoresis medical equipment, electronic industry, circuits Board production, electronic chip manufacturing, chemical industry, paper making, pharmaceutical industry, food processing industry, aluminum profile, aluminum alloy, tempered glass, coated glass production, ultrasonic cleaning, jewelry processing, leather, fur processing, ink production and breeding industry.

The air cooled chiller refrigeration cycle system is also used in CNC machine tools, coordinate boring machines, grinders, machining centers, combined machine tools and various types of precision machine tool spindle lubrication and cooling of hydraulic system transmission media. It can effectively control oil temperature and effectively reduce machine tool wear and tear. Thermal deformation improves the processing accuracy of machine tools.

 

---

 

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products up to 900 tons. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 15251628237

 

---

 

Cooling Chillers                                                                                                     

 

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

 

 

Temperature range	-25°C ~ +30°C series	-45°C ~ +30°C series	-60°C ~ -20°C series	-80°C ~ -20°C series	-120°C ~ -70°C series
Cooling Capacity	0.8 ~ 30kW	0.75 ~ 12kW	0.4 ~ 6kW	0.2 ~ 6kW	0.3 ~ 5kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized

 

---

 

Water Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

 

 

Temperature range	-18°C ~ +30°C	+5°C ~ +35°C series
Cooling Capacity	0.35 ~ 0.9kW	1.8 ~ 50kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized

 

---

 

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

 

 

Temperature range	-25°C ~ -5°C series	-45°C ~ -10°C series	-60°C ~ -10°C series	-80°C ~ -30°C series	-110°C ~ -50°C series	-150°C ~ -110°C series
Cooling Capacity	12 ~ 360kW	6 ~ 180kW	6 ~ 180kW	4 ~ 180kW	2 ~ 120kW	2.5 ~ 11kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized

 

---

 

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

 

 

Temperature range	+5°C ~ +40°C	-25°C ~ +40°C	-45°C ~ +40°C	-80°C ~ +80°C	-100°C ~ +80°C
Cooling Capacity	6 ~ 40kW	2 ~ 15kW	1 ~ 8kW	0.6 ~ 3kW	1.5 ~ 3kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized

 

 

Cooling and Heating Chillers                                                                            

 

Cooling and Heating Chillers

(Custom Designs)

Temperature Control Range: -120°C to +350°C

cooling and heating thermostat, widely used in various industry.

 

Temperature range	-10 ~ +150°C series	-25 ~ +200°C series	-25 ~ +300°C series	-45 ~ +250°C series	-45 ~ +300°C series	-60 ~ +250°C series	-60 ~ +300°C series	-70 ~ +250°C series	-80 ~ +250°C series	-90 ~ +250°C series	-100 ~ +100°C series
Cooling Capacity	1.5 ~ 15kW	1 ~ 200kW	1 ~ 200kW	0.45 ~ 200kW	0.9 ~ 25kW	0.25 ~ 60kW	0.75 ~ 25kW	0.4 ~ 15kW	0.3 ~ 80kW	0.2 ~ 80kW	0.45 ~ 80kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized

 

---

 

Recirculating Heater Chillers

(Custom Designs)

Temperature Control Range: -45°C to +250°C

 

Temperature range	-25°C ~ +200°C series	-45°C ~ +250°C series
Cooling Capacity	1 ~ 15kW	0.25 ~ 15kW
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized