Heavy Duty Chiller

How does heavy duty chiller work?

1. Refrigerant cycle

The refrigerant cycle of heavy duty chiller is completed by evaporation and condensation. When the refrigerant evaporates in the evaporator, it absorbs heat, cools the water, and then compresses it into high-temperature and high-pressure gas through the compressor, which enters the condenser for condensation. In the condenser, the heat absorbed by the refrigerant is released, forming a liquid coolant. Next, the liquid coolant enters the evaporator through the plug valve and circulates back and forth for cooling.

2. Evaporative cooling

During the refrigeration process of the heavy duty chiller, the cooling water enters the water inlet in the center direction of the evaporator through the water pump, flows into the bottom of the evaporator, and exposes multiple twisted plug plates, which expands the water flow and vertical distribution, and increases the surface area. Under the action of the plug plate, the cooling water is diffused into a thin water film and flows to the outer surface of the evaporator aluminum plate. The intermolecular force between water molecules is broken, so that part of the cooling water molecules are dissolved in the coolant in the gaseous state, and the other is dissolved in the coolant. Part of the refrigerant absorbs the latent heat of this part of the water molecules and evaporates and cools.

3. Compression

After the refrigerant absorbs heat in the evaporator, it forms a low-temperature and low-pressure gas, which is then sucked into the compressor and compressed into a high-temperature and high-pressure gas with a certain amount of energy. At this time, the temperature of the refrigerant increases, changing from a low-temperature and low-pressure state to a high-temperature and high-pressure state.

4. Condensation

After the high-temperature and high-pressure gas enters the condenser, it goes through a series of processes to change the state of the refrigerant from gaseous to liquid. At the same time, it absorbs a large amount of heat and releases it to the outside of the condenser, thereby achieving the refrigeration effect.

5. Cooling water circulation

During the working process of the heavy duty chiller, in addition to the refrigerant circulation, cooling water also needs to be pumped out of the machine through a water pump and circulated to play a cooling role. After the cooling water flows through the condenser, it takes away the released waste heat and then returns to the evaporator again for circulation cooling.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

Fornecemos soluções personalizadas não padronizadas. Estão disponíveis chillers de refrigeração simples e unidades combinadas de refrigeração e aquecimento.

Correio eletrónico: lilia@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Chillers de arrefecimento                                                                                                     

Chillers de recirculação / Circulador refrigerado

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Mini Chillers / Small Chillers

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Refrigeradores de baixa temperatura

(Desenhos personalizados)

Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.

Chillers de alta temperatura

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Chillers de arrefecimento e aquecimento                                                                            

Chillers de arrefecimento e aquecimento

(Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +350°C

termóstato de arrefecimento e aquecimento, amplamente utilizado em várias indústrias.

Aquecedor de recirculação Chillers

(Desenhos personalizados)

Gama de controlo de temperatura: -45°C a +250°C