Search the entire website

LQ -110°C ~ -40°C    Gas Cooler

LQ -110°C ~ -40°C Gas Cooler

The temperature range of the equipment is -110 ℃ ~ -40 ℃, using environmentally friendly refrigerant, the cooling speed is fast. The products use branded compressors, mainly Carlisle and Emerson. Adopt a full set of high-quality cold control (Danfoss pressure controller, balance valve, expansion valve, solenoid valve, filter drier, Emerson oil separator, alco liquid sight glass, check valve, etc.). It adopts Siemens S7 PLC and 7-inch touch screen for automatic control operation, and provides temperature curve display, temperature record U disk and fault alarm record. Each piece of equipment is subjected to a load test at the factory, and the test time is not less than 12 hours.

Request a Quote                   Email Us 

Product Description:

※Gas heat transfer system withstands pressure of 25bar;

※The temp ranges from -40℃~-75 ℃, which can meet different temp;※Environmentally friendly refrigerants are used;

※Secondary supercooling technology is adopted to ensure rapidrefrigeration and low limit temperature;

※Adopt imported famous brand fully closed, demi-closed pistoncompressor, scroll flexible compressor. mainly from Carlisle,Tecumseh,Emerson;

※Double tube heat exchanger is chosen for the cold box, which hassmall volume, long residence time and high efficiency;

※Adopt a full set of improt cold control (Danfoss pressure controller,balance valve, expansion valve,solenoid valve, drying filter, Emersonoil separator, ALCO view mirror, one-way valve, etc.);

※Danfoss expansion valve and Tmerson electroic expansion valve※Siemens S7 PLC,7-inch touch screen, automatic control operation,
temperature curve display, temperature record U disk, fault alarm record;※Factory test: Each unit is tested with load in the factory for no less than12 hours;

Application:

It is used to cool the gas (without corrosion): normal temperature gases such as dry compressed air, nitrogen and argon are introduced into LQ series equipment, and the gas can reach the target low temperature and be supplied to the components or heat exchangers for demand test.

  • Automotive sensors
  • Vehicle control products
  • Electronic control units or ECUs
  • Incoming parts inspection
  • Semiconductor IC verification
  • Simuation-based tesing
  • Cooling heating stress full cycle
  • Desgin or fabrication weakness
  • Fast hot&cold thermal cycling
  • Electronic and mechanical subsystems
  • Core module chip test
  • Auxiliary module chip test
  • MCU chip test
  • Microcontroller Unit chip test

 

Customized Solutions For Your Process Needs

Leave a Message                  Email Us                      WhatsApp

 

Model LQ-4015 LQ-4030 LQ-4060 LQ-40100 LQ-7515 LQ-7530 LQ-7560 LQ-75100
LQ-4015W LQ-4030W LQ-4060W LQ-40100W LQ-7515W LQ-7530W LQ-7560W LQ-75100W
gas flow 15m3/h 30m3/h 60m3/h 100m3/h 15m3/h 30m3/h 60m3/h 100m3/h
lowest temperature -40 -40 -40 -40 -75 -75 -75 -75
Heat exchanger material The standard configuration sus304 contains a small amount of copper
Gas outlet diameter G3/8 G3/8 G1/2 DN50 G3/8 G3/8 G1/2 DN50
Control System Programmable controller and module
display and record 7-inch color touch screen, record curve temperature and alarm situation
Compressor French Tecumseh/Emerson Copeland
Power 220V 50/60HZ 380V 50HZ 220V 50/60HZ 380V 50HZ
Breaker 10A 10A 10A 16A 10A 16A 16A 25A

 

Model LQ-A1015W LQ-A1030W LQ-A1060W LQ-A10100W
gas flow 15m3/h 30m3/h 60m3/h 100m3/h
lowest temperature -110 -110 -110 -110
Heat exchanger material sus304 Contains a small amount of copper
Gas outlet diameter G3/8 G1/2 G1 DN50
Control System Programmable controller and module
display and record 7-inch color touch screen, recording curve temperature, pressure and alarm conditions
Cpmpressor French Tecumseh/Emerson Copeland

 

Customized Solutions For Your Process Needs

Leave a Message                  Email Us                      WhatsApp

 

Model LQ-4015 LQ-4030 LQ-4060 LQ-40100 LQ-7515 LQ-7530 LQ-7560 LQ-75100
LQ-4015W LQ-4030W LQ-4060W LQ-40100W LQ-7515W LQ-7530W LQ-7560W LQ-75100W
gas flow 15m3/h 30m3/h 60m3/h 100m3/h 15m3/h 30m3/h 60m3/h 100m3/h
lowest temperature -40 -40 -40 -40 -75 -75 -75 -75
Heat exchanger material The standard configuration sus304 contains a small amount of copper
Gas outlet diameter G3/8 G3/8 G1/2 DN50 G3/8 G3/8 G1/2 DN50
Control System Programmable controller and module
display and record 7-inch color touch screen, record curve temperature and alarm situation
Compressor French Tecumseh/Emerson Copeland
Power 220V 50/60HZ 380V 50HZ 220V 50/60HZ 380V 50HZ
Breaker 10A 10A 10A 16A 10A 16A 16A 25A

 

Model LQ-A1015W LQ-A1030W LQ-A1060W LQ-A10100W
gas flow 15m3/h 30m3/h 60m3/h 100m3/h
lowest temperature -110 -110 -110 -110
Heat exchanger material sus304 Contains a small amount of copper
Gas outlet diameter G3/8 G1/2 G1 DN50
Control System Programmable controller and module
display and record 7-inch color touch screen, recording curve temperature, pressure and alarm conditions
Cpmpressor French Tecumseh/Emerson Copeland

 

CUSTOM OPTIONS

  • CUSTOM CHILLER SIZES

Whether it is portable, compact, large and small chillers, we can custom design them according to your requirements.

No matter how many tons of chiller you need, we can create the best solution.

  • CUSTOM TEMPERATURE RANGES

We can create a custom solution for temperatures from -150℃ to +350℃.

Custom temperature ranges for specific industries.

  • CUSTOM COOLING CAPACITY

We offer a very wide range of cooling capacities for various industries.

  • CUSTOM CHILLER TYPES

We provide chillers of various refrigeration types, including but not limited to air-cooled, water-cooled and evaporative-condensing chillers.

Regardless of the type of refrigeration compressor, we can design it according to your requirements.

  • CUSTOM CHILLER ACCESSORIES

We use a variety of internationally renowned accessories, all of which can be customized for your needs, such as compressors, evaporators, heat exchangers, circulation pumps, controllers, expansion valves and shell materials, etc.

  • CUSTOM CHILLER VOLTAGE

Customize chiller voltage and phase according to your needs.

Optional 110V/60HZ, 220V/60HZ, 380V/50HZ, 220V/50HZ, 400V/50HZ, 460V/60HZ, 440V~480V/60HZ, etc.

  • OTHER CUSTOMIZED SOLUTIONS

 

Tell Us More About Your Needs       

 

OUR ADVANTAGES

We offer:

Experience you can count on—

We’ve been designing and building custom products for more than 20 years. From medical chillers to energy storage chillers and everything in between, we’ve built products for virtually every industry and every application.

Same day quotes—

Get a quote for your project today! We often provide custom quotes in as little as 30 minutes.

24/7 customer service—

We are always here for you. Whether you have a question or need a quote, there’s always somebody here to communicate with you 24/7.

Durable, reliable equipment—

Our products are built with premium-grade materials, and we offer competitive warranties on all custom products.

 

Request A Quote                  Email Us                      WhatsApp

Copyright information belongs to lneya-online.com, please contact email for details: lilia@lneya.com

Or scan the WhatsApp or WeChat QR code below to contact us. 

WhatsAPP                                   WeChat

scan

Latest News
    Request a Quote
    Name
    Email Address
    Phone
    Company
    Message