What causes the 저온 냉각기 to trip when it is turned on? This is a problem that many users may encounter when using the device for the first time. If the chiller still trips when it meets the startup conditions, first check the power supply. After eliminating the power problem, then from the control system of the equipment, as well as the equipment itself, the use of the refrigeration system and Check the environment one by one.
Today, LNEYA Refrigeration will discuss in detail the problem of chiller tripping caused by power supply factors. There are many reasons for power failure, mainly in the following three points:
1 The three-phase power supply of the power supply system is out of phase. The common power supply of chillers is 3-phase, 380V, 50HZ. If the power supply line is damaged, or the junction of the switch and the cable is loosened, and the contact failure of the switch itself, it will cause a phase loss. In particular, the failure of the switch itself is relatively common, and this kind of failure can be checked out with a multimeter.
2 The parameter setting of the switch of the power supply system does not meet the requirements. After eliminating the quality problem of the switch, if the chiller still trips when it starts, then we need to check the parameter settings. If the allowable operating current of the switch is less than the starting current, there will definitely be a tripping phenomenon. If the short-time delay current parameter is set too low, the chiller will also trip under the influence of inrush current when it rotates at low speed and high speed. Therefore, when overhauling, be sure to check the switch parameters and adjust them to an appropriate state, and protect the switch parameter settings to prevent others from making mistakes.
3 The power supply three-phase output quality of the power supply system. For example, if the three-phase power supply voltage is insufficient or the output is unbalanced, the relay will disconnect the voltage or start the protection action, resulting in the shutdown of the chiller. Such problems are generally caused by the failure of the power supply equipment or the heavy line load.
The above is one of the reasons why the chiller trips when it starts: analysis of power supply failure. In order to ensure that the power supply system is in the best working state, it is necessary to supply the chiller with normal power. Users are requested to check and maintain the power supply system at ordinary times, find and eliminate problems in time, so as to avoid the chiller not running normally due to power problems.
We are a professional manufacturer of chillers and temperature control equipment, supporting customized services, please 문의하기 자세한 내용을 확인하세요!
저온 냉각기(수냉식 및 공냉식)
온도 제어 범위: -150°C ~ -5°C
당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.
온도 범위 | -25°C ~ -5°C 시리즈 | -45°C ~ -10°C 시리즈 | -60°C ~ -10°C 시리즈 | -80°C ~ -30°C 시리즈 | -110°C ~ -50°C 시리즈 |
냉각 용량 | 최대 360kW | 최대 360kW | 최대 360kW | 최대 270kW | 최대 180kW |
재순환 냉각기 (수냉식 및 공냉식)
온도 제어 범위: -120°C ~ +30°C
당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.
온도 범위 | -25°C ~ +30°C 시리즈 | -45°C ~ +30°C 시리즈 | -60°C ~ -20°C 시리즈 | -80°C ~ -20°C 시리즈 | -120°C ~ -70°C 시리즈 |
냉각 용량 | 최대 38kW | 최대 12kW | 최대 7.2kW | 최대 7.2kW | 최대 8.6kW |
실온 냉각기/소형 냉각기
온도 제어 범위: +5°C ~ +50°C
이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.
온도 범위 | -18°C ~ +30°C | +5°C ~ +35°C 시리즈 |
냉각 용량 | 최대 0.9kW | 최대 50kW |
직접 냉각식 냉동 장비
온도 제어 범위: -120°C ~ -10°C
열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.
온도 범위 | -40°C ~ -10°C | -80°C ~ -35°C | -120°C ~ -90°C |
압축기 전력 | 최대 8HP | 최대 8HP*2 | 최대 45HP*3 |
직접 냉각식 초저온 냉각기
온도 제어 범위: -150°C ~ -110°C
비즈니스를 위한 맞춤형 솔루션.
온도 범위 | -150°C ~ -110°C |
냉각 용량 | 최대 11kW |
스크류 냉각기
저온 스크류 냉각기 및 실온 스크류 냉각기
비즈니스를 위한 맞춤형 솔루션.
온도 범위 | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | -25°C ~ +5°C | -25°C ~ +5°C |
냉각 용량 | 최대 1027kW(단일 컴프레서) | 최대 2134kW(듀얼 컴프레서) | 최대 934kW(단일 컴프레서) | 최대 1940kW(듀얼 컴프레서) | 최대 467kW(단일 컴프레서) | 최대 497kW(단일 컴프레서) |