Reasons and Solutions for the Fan of the Air Cooled Chiller not Running

Reasons and Solutions for the Fan of the Air Cooled Chiller not Running

Air-cooled chillers are widely used in many areas where water sources are lacking, but after a few years of use, there may be some failures. It is more common that the fan of the chiller does not run. Therefore, today I will share with you the reasons and solutions for the fan of the air-cooled chiller not running.

1. The motor winding of the fan is burned out. Solution: Replace the motor or rewind the winding set.

2. The belt is damaged. Solution: Replace the belt.

3. The fan relay is burnt out. Solution: Replace the relay.

4. The wire connection is loose. Solution: Check and tighten the wire connection.

5. The fan motor bearing is stuck. Solution: Replace the bearing.

The functions of 공냉식 냉각기 그리고 수냉식 냉각기 are both cooling and cooling, and the main difference lies in the different cooling methods. The fan of the air-cooled chiller is very important. It is the finned condenser of the air-cooled unit, which is constantly exchanged with air. Once the heat dissipation is not good, it will directly affect the chiller’s failure to cool normally. Therefore, I remind everyone that after the air-cooled chiller runs for half a year or a year, it is necessary to clean the finned condenser and clean the dust and other debris on the fan to ensure it is clean and tidy. This is not only conducive to the normal cooling of the equipment, but also prolongs the service life of the air-cooled chiller and saves operating costs for the enterprise.

우리는 온도 제어 장비의 전문 제조업체로 맞춤형 서비스를 지원합니다. 문의하기 자세한 내용을 확인하세요!

워터 칠러

온도 제어 범위: -150°C ~ +50°C

동적 온도 제어 시스템

온도 제어 범위: -120°C ~ +350°C

자동차 테스트 냉각기

온도 제어 범위: -40°C ~ +100°C

반도체 테스트 냉각기

온도 제어 범위: -85°C ~ +250°C

산업용 냉장고

온도 제어 범위: -150°C ~ -10°C