Reasons and Solutions for the Fan of the Air Cooled Chiller not Running

2022/08/26 ClassificationNouvelles de l'industrie 288

Reasons and Solutions for the Fan of the Air Cooled Chiller not Running

Air-cooled chillers are widely used in many areas where water sources are lacking, but after a few years of use, there may be some failures. It is more common that the fan of the chiller does not run. Therefore, today I will share with you the reasons and solutions for the fan of the air-cooled chiller not running.

1. The motor winding of the fan is burned out. Solution: Replace the motor or rewind the winding set.

2. The belt is damaged. Solution: Replace the belt.

3. The fan relay is burnt out. Solution: Replace the relay.

4. The wire connection is loose. Solution: Check and tighten the wire connection.

5. The fan motor bearing is stuck. Solution: Replace the bearing.

The functions of air-cooled chillers et water-cooled chillers are both cooling and cooling, and the main difference lies in the different cooling methods. The fan of the air-cooled chiller is very important. It is the finned condenser of the air-cooled unit, which is constantly exchanged with air. Once the heat dissipation is not good, it will directly affect the chiller’s failure to cool normally. Therefore, I remind everyone that after the air-cooled chiller runs for half a year or a year, it is necessary to clean the finned condenser and clean the dust and other debris on the fan to ensure it is clean and tidy. This is not only conducive to the normal cooling of the equipment, but also prolongs the service life of the air-cooled chiller and saves operating costs for the enterprise.

Nous sommes un fabricant professionnel d'équipements de contrôle de la température et nous offrons des services personnalisés. nous consulter pour plus de détails !