250 Ton Chiller – Chilling System Manufacturer

250 Ton Chiller – Chilling System Manufacturer

The main content of maintenance of 250 ton chiller includes daily maintenance and regular inspection. Regular inspection and maintenance can ensure the long-term normal operation of the unit and prolong the service life of the unit.

1. The 250 ton chiller compressor is a very critical part of the unit, and the quality of the compressor is directly related to the stability of the unit. The user should have an operation record, record the operation of the unit, and establish a maintenance technical file. The complete technical information is helpful to discover hidden troubles and take measures early to prevent the occurrence of troubles.

2. Since the cooling water of the condenser is an open circulation loop, the tap water generally used is recycled through the cooling tower. When the content of calcium salt and magnesium salt in the water is large, it is easy to decompose and deposit on the cooling water pipe to form scale, which affects heat transfer. Excessive scaling will also reduce the circulation section of cooling water, reduce the amount of water, and increase the condensation pressure. Therefore, when the water quality of the cooling water used is poor, the cooling water pipe should be cleaned at least once a year to remove scale and other dirt in the pipe.

3. After the 250 ton chiller is used for a long time, the oil quality of the lubricating oil will deteriorate, and the impurities and moisture inside the oil will increase, so the oil quality should be observed and checked regularly. Once a problem is found, it should be replaced in time.

4. The dry filter is an important part to ensure the normal circulation of the refrigerant. Since water and refrigerant are incompatible with each other, if there is water in the system, it will greatly affect the operating efficiency of the unit. Therefore, it is very important to keep the inside of the system dry, and the filter element inside the drying filter should be replaced regularly.

5. Both the condenser and evaporator of the 250 ton chiller are pressure vessels. According to regulations, a safety valve should be installed on the high-pressure end of the unit, that is, the condenser body. Once the unit is in an abnormal working environment, the safety valve can automatically release Pressure, in order to prevent possible damage to the human body caused by high pressure. Therefore, the regular calibration of the safety valve is very important for the safety of the whole unit.

6. If there is no other special reason, the general unit will not produce a large amount of leakage. If a certain amount of refrigerant leaks due to improper use or after maintenance. Refrigerant needs to be added again. Charge the refrigerant and pay attention to the type of refrigerant used by the unit.

カスタマイズされたソリューション

低温チラー（水冷式・空冷式）

温度制御範囲：-150℃～-5

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (水冷・空冷）

温度制御範囲：-120℃～+30

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー

温度制御範囲+5℃〜+50

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

直接冷却式冷凍機

温度制御範囲：-120℃～-10

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

温度制御範囲：-150℃～-110

お客様のビジネスにカスタマイズされたソリューションを提供します。

スクリュー冷凍機

低温スクリュー冷凍機と常温スクリュー冷凍機

お客様のビジネスにカスタマイズされたソリューションを提供します。