Refrigeration Method of Electroplating Process Chiller

Refrigeration Method of Electroplating Process Chiller

There are two cooling methods in the electroplating field.

One is indirect cooling:

Because the electroplating solution is generally acidic or alkaline corrosive, the general customer will put some corrosion-resistant titanium tubes in the electroplating tank, and then the cooling water of the industrial chiller will cool the electroplating solution through the titanium tube.

The advantage of the industrial chiller using indirect cooling to cool the electroplating solution is that it is easy to install, and the acid and alkali are not easy to corrode the equipment, so the service life is relatively longer.

The second is direct cooling:

Direct cooling is to make the evaporator of the industrial chiller into a corrosion-resistant material, and the electroplating solution is directly passed into the industrial chiller to cool down and then returned to the electroplating tank.

The advantage of using industrial chillers for direct cooling is that the heat exchange efficiency will be relatively increased, and the overall cost will be relatively lower, but the difference is not very large.

Siamo un produttore professionale di apparecchiature di controllo della temperatura, sostenendo servizi personalizzati, si prega di consultateci per i dettagli!

Refrigeratori d'acqua

Intervallo di controllo della temperatura: da -150°C a +50°C

Sistemi di controllo dinamico della temperatura

Intervallo di controllo della temperatura: da -120°C a +350°C

Refrigeratori di prova per automobili

Intervallo di controllo della temperatura: da -40°C a +100°C

Refrigeratori di prova per semiconduttori

Intervallo di controllo della temperatura: da -85°C a +250°C

Frigoriferi industriali

Intervallo di controllo della temperatura: da -150°C a -10°C