5 Ton Air Cooled Chiller

5 Ton Air Cooled Chiller

The 5 ton air cooled chiller is a new type of temperature control equipment for different process varieties, which achieves process goals through cooling. The chiller is composed of a water pump, unit, cold water tank and water pipe components. It is simple and convenient to install. Customers only need to turn on the power to use it. Because the source of heat exchange is gas, it is equipped with a special electric fan, so it is called “air cooling”. 5 ton air cooled chiller is different from water-cooled chiller. Chiller manufacturers use the principle of cold and heat exchange for cooling, which can quickly cool down, maintain stability, and save energy and protect the environment. It can more precisely control the temperature required for mold forming, accelerate product shaping and improve production efficiency. Air-cooled equipment is a relatively energy-saving refrigeration equipment. It uses wind as the cooling medium and is not disturbed by external factors such as water sources. It can cool down in a short period of time, and the later use cost is relatively low.

Key advantages of the 5 ton air cooled chiller:

1. Free from the influence of external factors

Due to the air-cooling method, even if there are many unfavorable factors in the environment, the enterprise can operate the chiller safely and stably. Of course, after the 5 ton air cooled chiller has been in operation for more than one year, the enterprise needs to formulate the operation plan of the chiller in time, and run the chiller for a long time within the scope of the safety plan, which can not only ensure the stable operation of the equipment, but also avoid the damage caused by various external factors. Sudden increase in operating costs. The lower the cost for enterprises to use chillers, the higher the stability of enterprises using chillers.

2. The probability of failure is low

Due to the air cooling method, the main cooling device is the fan. Even if the chiller runs for a long time, as long as the electronic fan can work normally, the 5 ton air cooled chiller will basically not have any failures. Of course, if the enterprise uses the chiller without realizing the electronic risks, it will also require regular maintenance, causing the chiller to continue to malfunction during use. If the failure rate is high, the enterprise will only be unable to afford the operating expenses of the equipment.

Des solutions personnalisées pour votre entreprise

Refroidisseurs à basse température (refroidis par eau ou par air)

Technologie de réfrigération en cascade à très basse température.

Chaque segment de température comporte plus d'une douzaine de modèles de produits parmi lesquels vous pouvez choisir.

Refroidisseurs à circulation (Refroidissement par eau ou par air)

Canalisation à circulation fermée, éthylène glycol mélangé à de l'eau pour la réfrigération.

Refroidisseurs à température ambiante / Petits refroidisseurs

Système de contrôle de la température de réfrigération de haute précision.

Équipements de réfrigération à refroidissement direct

Il convient aux endroits où la surface d'échange de chaleur est faible et où l'échange de chaleur est important.

Refroidissement direct Refroidisseurs à très basse température

Le refroidisseur à refroidissement direct à ultra-basse température adopte la technologie de sous-refroidissement secondaire et la vitesse de refroidissement est rapide. Le réfrigérant du système de réfrigération est directement évacué et évaporé dans l'élément de contrôle cible (échangeur de chaleur) pour le refroidissement.