Five Cooling Solutions for Cabinets

Contact us today for the perfect temperature control solution

 

There are many solutions for cabinet cooling. Here are some common solutions:

1. Air conditioning cooling: Use the air conditioning system to provide cold air to the cabinet, send the cold air into the cabinet through the fan, and discharge the hot air out of the cabinet. This solution is suitable for large computer rooms or data centers and can provide stable temperature and humidity control.

2. Water cooling: By installing water-cooling fins or water-cooling units inside the cabinet, the heat in the cabinet is dissipated through water. Water cooling solutions can provide higher heat dissipation efficiency, but require the installation of additional water cooling systems and piping.

3. Ventilation and cooling: Install a fan or air cooling system inside the cabinet to reduce the temperature inside the cabinet by increasing air flow. This solution is suitable for small computer rooms or a small number of servers. The cost is relatively low, but the cooling effect may be poor.

4. Cold aisle/hot aisle isolation: Isolate the cabinet according to the cold aisle and hot aisle, and reduce the temperature inside the cabinet by optimizing the path of hot and cold air circulation. This solution can improve heat dissipation efficiency, but requires reasonable planning and wiring of the computer room.

5. Use an environmental monitoring system: By installing temperature and humidity sensors and monitoring equipment, the temperature and humidity in the cabinet are monitored in real time, and the cooling plan is adjusted based on the monitoring results to keep the temperature in the cabinet within an appropriate range.

Based on actual needs and budget, you can choose a suitable cabinet cooling solution. When choosing a solution, factors such as energy consumption, cooling efficiency, cost, and maintainability need to be considered. At the same time, reasonable cabinet layout and space management are also key to improving cooling effect.

 

Model	ZLFQ-15	ZLFQ-25	ZLFQ-50	ZLFQ-75	ZLFQ-100	ZLFQ-150
Temp range	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃
Cooling water	5℃~30℃ Adopt Siemens/Honeywell regulating valve to control cooling water flow
Temperature control accuracy	±0.2℃	±0.5℃	±0.5℃	±0.5℃	±0.5℃	±0.5℃
flow control	10～25L/min	25～50L/min	40～110L/min	70～150L/min	150～250L/min	200～400L/min
	The flow control is adjusted by frequency converter, the accuracy is ±0.3L/min
Cooling capacity (MAX)	15kW	25kW	50kW	75kW	100kW	150kW
Storage volume	15L	30L	60L	100L	150L	200L
Brine	Water, silicone oil, fluorinated liquid, ethylene glycol aqueous solution, etc.
Medium pipeline	SUS304	SUS304	SUS304	SUS304	SUS304	SUS304
In and out interface size	G3/4	G1	G1	DN32	DN40	DN50
Cooling water interface	G3/4	G1	DN40	DN50	DN50	DN65
Cooling water flow 7～20℃	2.5m³/h	4m³/h	8m³/h	13m³/h	17m³/h	25m³/h
380V 50HZ	1kW	1.5kW	3kW	4kW	5kW	6kW
shell	Cold-rolled sheet spray RAL7035

 

Model	ZLFQ-200	ZLFQ-250	ZLFQ-300	ZLFQ-400	ZLFQ-500
Temp range	+5℃～35℃
Temp accuracy	±0.5℃
Flow control	15～30m³/h	20～35m³/h	25～40m³/h	30～60m³/h	40～70m³/h
Cooling capacity（MAX）	200kW	250kW	300kW	400kW	500kW
Storage volume	250L	300L	600L	1000L	1200L
Medium	Water, silicone oil, fluorinated liquid, ethylene glycol aqueous solution, etc.
Medium pipeline	SUS304
In and out interface size	DN65	DN65	DN65	DN80	DN80
Cooling water interface	DN80	DN80	DN100	DN100	DN125
Cooling water flow 7～20℃	34m³/h	43m³/h	51m³/h	69m³/h	86m³/h
Power supply 380V 50HZ	7kW	7kW	8kW	9kW	13kW
shell	Cold-rolled sheet spray RAL7035

 

 

We provide complete temperature control system design and manufacturing. From standard models to complete customized products up to 1000 tons. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. 

 

Email: lilia@lneya.com   WeChat ID: +8615251628237    WhatsApp: +86 15251628237