Five Cooling Solutions for Cabinets

2024/01/26 분류업계 뉴스 120 0

Five Cooling Solutions for Cabinets

There are many solutions for cabinet cooling. Here are some common solutions:

1. Air conditioning cooling: Use the air conditioning system to provide cold air to the cabinet, send the cold air into the cabinet through the fan, and discharge the hot air out of the cabinet. This solution is suitable for large computer rooms or data centers and can provide stable temperature and humidity control.

2. Water cooling: By installing water-cooling fins or water-cooling units inside the cabinet, the heat in the cabinet is dissipated through water. Water cooling solutions can provide higher heat dissipation efficiency, but require the installation of additional water cooling systems and piping.

3. Ventilation and cooling: Install a fan or air cooling system inside the cabinet to reduce the temperature inside the cabinet by increasing air flow. This solution is suitable for small computer rooms or a small number of servers. The cost is relatively low, but the cooling effect may be poor.

4. Cold aisle/hot aisle isolation: Isolate the cabinet according to the cold aisle and hot aisle, and reduce the temperature inside the cabinet by optimizing the path of hot and cold air circulation. This solution can improve heat dissipation efficiency, but requires reasonable planning and wiring of the computer room.

5. Use an environmental monitoring system: By installing temperature and humidity sensors and monitoring equipment, the temperature and humidity in the cabinet are monitored in real time, and the cooling plan is adjusted based on the monitoring results to keep the temperature in the cabinet within an appropriate range.

Based on actual needs and budget, you can choose a suitable cabinet cooling solution. When choosing a solution, factors such as energy consumption, cooling efficiency, cost, and maintainability need to be considered. At the same time, reasonable cabinet layout and space management are also key to improving cooling effect.

모델	ZLFQ-15	ZLFQ-25	ZLFQ-50	ZLFQ-75	ZLFQ-100	ZLFQ-150
온도 범위	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃	+5℃～35℃
냉각수	5℃~30℃ 냉각수 흐름을 제어하기 위해 지멘스/허니웰 조절 밸브 채택
온도 제어 정확도	±0.2℃	±0.5℃	±0.5℃	±0.5℃	±0.5℃	±0.5℃
흐름 제어	10~25L/min	25~50L/min	40~110L/min	70~150L/min	150~250L/min	200~400L/min
	유량 제어는 주파수 변환기에 의해 조정되며 정확도는 ±0.3L/min입니다.
냉각 용량(최대)	15kW	25kW	50kW	75kW	100kW	150kW
저장 용량	15L	30L	60L	100L	150L	200L
소금물	물, 실리콘 오일, 불소화 액체, 에틸렌글리콜 수용액 등이 있습니다.
중간 파이프라인	SUS304	SUS304	SUS304	SUS304	SUS304	SUS304
인/아웃 인터페이스 크기	G3/4	G1	G1	DN32	DN40	DN50
냉각수 인터페이스	G3/4	G1	DN40	DN50	DN50	DN65
냉각수 흐름 7～20℃	2.5m³/h	4m³/h	8m³/h	13m³/h	17m³/h	25m³/h
380V 50HZ	1kW	1.5kW	3kW	4kW	5kW	6kW
shell	냉간 압연 시트 스프레이 RAL7035

모델	ZLFQ-200	ZLFQ-250	ZLFQ-300	ZLFQ-400	ZLFQ-500
온도 범위	+5℃～35℃
온도 정확도	±0.5℃
흐름 제어	15～30m³/h	20～35m³/h	25～40m³/h	30～60m³/h	40～70m³/h
냉각 용량(최대)	200kW	250kW	300kW	400kW	500kW
	200kW	250kW	300kW	400kW	500kW
저장 용량	250L	300L	600L	1000L	1200L
Medium	물, 실리콘 오일, 불소화 액체, 에틸렌글리콜 수용액 등이 있습니다.
중간 파이프라인	SUS304
인/아웃 인터페이스 크기	DN65	DN65	DN65	DN80	DN80
냉각수 인터페이스	DN80	DN80	DN100	DN100	DN125
냉각수 흐름 7～20℃	34m³/h	43m³/h	51m³/h	69m³/h	86m³/h
전원 공급 장치 380V 50HZ	7kW	7kW	8kW	9kW	13kW
shell	냉간 압연 시트 스프레이 RAL7035