The Solution to the High Condensing Pressure of the Chiller

Refrigeration chillers are divided into luftgekühlte Kältemaschinen und wassergekühlte Kältemaschinen, both of which are industrial refrigeration equipment, and most of the components are the same, except for the condenser. However, it is precisely because of the different types of condensers that the two cooling methods are different. The air-cooled chiller uses a fin-type condenser with its own fan for heat dissipation, while the water-cooled chiller uses a shell-and-tube condenser, which needs to be equipped with a cooling water tower to dissipate heat

However, today, instead of discussing the characteristics and differences of the two types of condensers, we want to tell you what to do when the condensing pressure of the chiller is too high. Since there is a problem, of course, it is necessary to find out the cause before it can be solved in time. Let’s take a look at the fault analysis and treatment method of the high condensing pressure of the chiller.

1. The amount of cooling water provided to the chiller is insufficient, and the temperature difference between the inlet and outlet water is too large. Treatment method: increase the water supply, check whether the valve is in a fully open state, and whether the pipeline is blocked or not.

2. The fan of the cooling water tower is reversed and cannot provide circulating cooling water. Treatment method: Check and correctly connect the phase wires of the cooling tower fan motor.

3. The condenser of the chiller is dirty. Treatment method: The condenser should be cleaned regularly to keep it clean and tidy, so that the condensation effect can be better.

4. There is air in the water system. Treatment method: The air in the water should be removed in time. Either through the device’s vent valve, or by opening the pump’s valve.

5. Excessive liquid accumulation in the condenser reduces the effective cooling area. Treatment method: Open the liquid outlet valve enough to remove the refrigerant liquid stored in the condenser.

6. Excessive refrigerant charge. Treatment method: Remove excess refrigerant and ensure that the amount of refrigerant is within the specified range.

7. The water distribution of the cooling water tower is uneven. Treatment method: Check the cause and let the cooling water tower distribute water evenly.

After the chiller has been used for a long time, some small faults will inevitably occur. The user can stop and check the corresponding equipment according to the fault prompt, and then start the equipment after troubleshooting in time. If you cannot handle it yourself, please contact the chiller manufacturer directly for maintenance.

Wir sind ein professioneller Hersteller von Kältemaschinen und Temperiergeräten und unterstützen kundenspezifische Dienstleistungen. uns konsultieren für Details!

Niedertemperatur-Kühlgeräte

Temperaturregelbereich: -150°C bis -5°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.

Rückkühler

Temperaturregelbereich: -120°C bis 30°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.

Normaltemperatur-Kühlgeräte

Temperaturregelbereich: +5°C bis +50°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.