Features and Advantages of Reactor Refrigeration and Heating System

2022/07/28 KlassifizierungIndustrie-Nachrichten 318

Features and Advantages of Reactor Refrigeration and Heating System

The cooling and heating temperature control system of the reactor adopts a fully closed pipeline design, and LNEYA adopts an effective plate heat exchanger, which reduces the demand for heat transfer fluid and improves the heat utilization rate of the system to achieve rapid temperature rise and fall.

The performance characteristics of the reactor refrigeration and heating temperature control system:

1. The controller of the reactor refrigeration and heating temperature control system adjusts the temperature of the thermal fluid according to the temperature of the thermal fluid measured by the temperature sensor or the internal temperature of the temperature control device to adjust the temperature of the temperature control device. In this process, there are heating and exothermic processes.

2. The reactor refrigeration and heating temperature control system can be used for heating and cooling of other special equipment. The reactor refrigeration and heating temperature control system is divided into two systems: refrigeration system and heating system. The two systems can be used continuously or independently. High temperature cooling, refrigeration function, can also be cooled from high temperature (such as direct cooling from 300 ℃).

3. The cooling and heating temperature control system of the reactor shall not be closed by cutting off the main power supply in non-emergency situations. If it is disabled for a long time in autumn and winter, the circulation system should be closed first, then the main power supply should be closed, and the water in the system should be drained.

4. The relays, protection devices, capacitors and other devices used in the reactor refrigeration and heating temperature control system are imported high-quality equipment to ensure reliable and reliable performance and service life of the integrated high and low temperature circulation system.

5. The cooling and heating temperature control system of the reactor does not have a tank for internal circulation. The volume of the internal circulation is small, the power density is reasonable, the working efficiency of heating and cooling is rapid, and the amount of heat transfer oil used is relatively small.

The reactor cooling and heating temperature control system is equipped with anti-freezing, overheating, pressure control and other protection devices in addition to the functions of over-under-voltage, phase-loss, and overload provided by the internal protection module of the compressor to make the unit work more effectively. After debugging and leaving the factory, component installation, operation debugging and testing under different working conditions have been completed in the factory, ensuring that each equipment is qualified and leaving the factory, which greatly reduces the on-site installation and debugging time.

Wir sind ein professioneller Hersteller von Temperaturkontrollgeräten und unterstützen kundenspezifische Dienstleistungen, bitte uns konsultieren für Details!