Commonly Used Refrigerants in Chillers

Commonly Used Refrigerants in Chillers

1. Water

Water as a refrigerant is a low-cost solution that is completely non-toxic, readily available and environmentally friendly. However, choosing water as a refrigerant also has significant disadvantages, including:

· Ambient temperature can easily affect the efficiency of the cooling process

· Water can cause corrosion, damage refrigerant components and increase maintenance costs compared to some refrigerants.

2. R407C

The combination of hydrofluorocarbons difluoromethane (R32), pentafluoroethane (R125) and tetrafluoroethane (R134A) will provide heat, reduce flammability and reduce pressure, respectively. This refrigerant is recommended as the most suitable replacement for R-22 refrigerant systems, which will be phased out by 2020.

3. R404A

R404A should be considered if medium and low temperature refrigerants are required in the cooling process. This is a mixture of hydrocarbons that can be used in a variety of commercial settings, such as supermarkets and cold rooms.

4. R410A

For general purpose air conditioners, R410A is an anisotropic HFC mixture that can be used. It has no detrimental effect on the ozone layer and is gaining popularity as the R22 refrigerant is being phased out.

5. R22

R22, sometimes called R22 Freon or HCFC-22 Freon, has a boiling point of -40.7°C and is mainly used in low temperature systems. It is an environmental hazard and has been completely phased out due to its high Ozone Depletion Potential (ODP) = 0.05 and Global Warming Potential (GWP) = 1100.

6. R134A HFC

This is a hydrofluorocarbon (HFC) and halogenated alkane refrigerant commonly known as a defluorinating agent or Freon 134A. As a refrigerant, it has completely stable thermal properties, low toxicity, non-corrosiveness and non-flammability. Widely used in automotive air conditioning equipment and industrial air chiller equipment. Furthermore, R134A HFCs have the smallest ozone depletion potential and a global warming potential close to zero. Although considered relatively safe and environmentally friendly, the United States is planning to phase out its use.

7. R744 CO2

It is advantageous to use CO2 as a refrigerant because it is non-flammable and non-toxic. The downside is that a bulky system is required to handle the gas, and leaks can pose a huge safety hazard. Additionally, R744 C02 refrigerant can be very expensive to install and maintain.

8. R717 Ammonia

Ammonia (R717) is a refrigerant that belongs to the category of halogen-free chemicals. This is the most commonly used refrigerant in chillers. It has the highest level of heat absorption and is ideal for small portable chillers without the need for large cooling equipment. Another benefit of using ammonia as an air chiller refrigerant is its stable thermal performance. However, it should be handled with care as it has toxic effects on humans.

9. HCS

Hydrocarbons are another refrigerant used in domestic and industrial refrigeration air chillers. Common variants of hydrocarbon refrigerants are R600A (isobutylene) and R290 (propane). These refrigerant types are highly flammable and therefore require careful and special installation. As we all know, propane has no potential to destroy ozone, so it is suitable for environmentally friendly industrial air chillers.

Wir sind ein professioneller Hersteller von Temperaturkontrollgeräten und unterstützen kundenspezifische Dienstleistungen, bitte uns konsultieren für Details!

Niedertemperatur-Kühlgeräte

Temperaturregelbereich: -150°C bis -5°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.

Rückkühler

Temperaturregelbereich: -120°C bis 30°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.

Normaltemperatur-Kühlgeräte

Temperaturregelbereich: +5°C bis +50°C

Anwendung: Verschiedene Reaktoren, Destillations- oder Extraktionssysteme, Laboratorien, Forschungsinstitute, chemische, pharmazeutische, petrochemische, biochemische, medizinische Einrichtungen, Krankenhäuser, F&E-Werkstätten, Halbleitertests, Luft- und Raumfahrt, biologische und andere Industrien.