Chiller 50 kw – Water Chiller Industrial
During the long-term continuous operation of any equipment, some large and small faults will inevitably occur, and the 50 kw chiller is no exception. If we cannot solve these faults in time, it will affect the production of the enterprise, delay the construction period, and cause losses.
Fault 1: Blockage occurs
There is a filter in the 50 kw chiller to filter out impurities in the system. When the blockage in the system is serious, the cooling capacity will drop, and if it is serious, there may be frosting and other phenomena. In this case, the filter is usually blocked. At this time, the filter should be removed in time and replaced. filter of the same type.
Fault 2: Compressor high pressure alarm
When the compressor has a high-pressure alarm, some friends will be nervous, thinking that there is a major failure. In fact, this is usually because the ambient temperature is too high and the dust in the chassis is serious, which leads to a high-voltage alarm. High pressure alarm is actually a relatively simple and common problem. We clean up the surrounding environment of the chiller and open the windows for ventilation. The working environment of the chiller should not exceed 40°C. If the temperature is too high, an alarm will occur.
Fault 3: Check the parts and clean them
Clean the dust from the dust filter, heat dissipation aluminum foil and fan in the condenser. Check the evaporator for scale debris and remove them, check the condition of the lubricating oil, and replace the lubricating oil regularly, check whether there are loose or worn parts, and deal with them in time.
Surface cleaning is also very important for 50 kw chiller, long-term use will also cause a lot of dust and dirt, we should also keep the surface of 50 kw chiller clean.
Maßgeschneiderte Lösungen für Ihr Unternehmen
Low Temperature Chillers (Water Cooled & Air Cooled)
Temperaturregelbereich: -150°C bis -5°C
Wir haben uns auf die Herstellung von Niedertemperaturkältemaschinen mit einem Temperaturregelbereich von bis zu -150°C spezialisiert, die den Kühlbedarf verschiedener Branchen decken.
Temperaturbereich | Serie -25°C ~ -5°C | Serie -45°C ~ -10°C | Serie -60°C ~ -10°C | Serie -80°C ~ -30°C | Serie -110°C ~ -50°C |
Kühlleistung | bis zu 360 kW | bis zu 360 kW | bis zu 360 kW | bis zu 270kW | bis zu 180kW |
Rückkühler (Water Cooled & Air Cooled)
Temperature Control Range: -120°C to +30°C
Unser Rückkühler arbeitet mit Niedertemperatur-Kältetechnik, die Temperatur beträgt bis zu -120℃, und verschiedene Zubehörteile sind anpassbar.
Temperaturbereich | Serie -25°C ~ +30°C | -45°C ~ +30°C Reihe | Serie -60°C ~ -20°C | Serie -80°C ~ -20°C | Serie -120°C ~ -70°C |
Kühlleistung | bis zu 38kW | bis zu 12kW | bis zu 7,2 kW | bis zu 7,2 kW | bis zu 8,6 kW |
Raumtemperatur-Kühlgeräte / Kleinkühlgeräte
Temperaturregelbereich: +5°C bis +50°C
Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.
Temperaturbereich | -18°C ~ +30°C | +5°C ~ +35°C Reihe |
Kühlleistung | bis zu 0,9 kW | bis zu 50kW |
Kühlgeräte mit direkter Kühlung
Temperature Control Range: -120°C to -10°C
Er eignet sich für Orte mit kleiner Wärmeaustauschfläche und großem Wärmeaustausch.
Temperaturbereich | -40°C ~ -10°C | -80°C ~ -35°C | -120°C ~ -90°C |
Leistung des Kompressors | bis zu 8HP | bis zu 8HP*2 | bis zu 45HP*3 |
Direktkühlende Ultra-Niedrigtemperatur-Kühlgeräte
Temperature Control Range: -150°C to -110°C
Customized solutions for your business.
Temperaturbereich | -150°C ~ -110°C |
Kühlleistung | bis zu 11kW |
Schrauben-Kühlmaschinen
Niedertemperatur-Schraubenkühlmaschinen und Raumtemperatur-Schraubenkühlmaschinen
Customized solutions for your business.
Temperaturbereich | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | -25°C ~ +5°C | -25°C ~ +5°C |
Kühlleistung | up to 1027kW (Single Compressor) | up to 2134kW (Dual Compressor) | up to 934kW (Single Compressor) | up to 1940kW (Dual Compressor) | up to 467kW (Single Compressor) | up to 497kW (Single Compressor) |