Air Cooled Chiller – Chiller Supplier

Air Cooled Chiller – Chiller Supplier

The air cooled chiller can be used on small systems, and most of the large equipment are water-cooled. As far as the main engine is concerned, the initial investment of water-cooled chillers is a little less than that of air-cooled chillers. But with cooling towers and computer rooms\electronic water treatment equipment, etc., it is much higher than air cooled chillers. In terms of long-term operation, the cooling efficiency of the water-cooled chiller will decrease relatively, but the air cooled chiller will not.

The air cooled chiller adopts the air cooling method, which saves the cooling tower, cooling water pump and pipeline system that are necessary for the cooling water system, avoids scaling of the condenser and blockage of water pipes in areas with poor water quality, and saves water resources. Among air-conditioning equipment products, maintenance is economical and simple.

The one-time investment of air cooled chiller is slightly higher than that of water-cooled chiller, but the annual operating cost is lower than that of water-cooled chiller. Half the cost of the boiler.

The noise and volume of the air cooled chiller are larger than that of the water-cooled chiller, so it can only be installed outdoors. Water-cooled chillers are mostly installed in basements.

Product features of air cooled chiller:

1. The compressor adopts a scroll type hermetic compressor and electric control components, and is equipped with a condenser and an evaporator made of effective copper tubes for heat exchange;

2. The air cooled chiller is equipped with various safety protection devices, with stable performance, low noise, long service life, and easy operation; it adopts a liquid crystal display human-machine interface, which is simple and convenient to operate, and the operating status is clear at a glance;

3. Adopt single compressor or multi-compressor combined refrigeration system. The compressors can automatically run alternately according to load changes, balancing the running hours of each compressor, achieving the effect of saving energy and extending the service life of the chiller. Facilitate energy regulation, more energy saving at partial load;

4. The box structure of the whole machine has a beautiful appearance and a compact structure, and the operation of the air cooled chiller can be checked at any time; the equipment can be equipped with a water tank and a circulating water pump according to the cooling capacity, without a cooling tower and a cooling water pump, and the installation and maintenance are simple convenient.

Maßgeschneiderte Lösungen für Ihr Unternehmen

Low Temperature Chillers (Water Cooled & Air Cooled)

Temperaturregelbereich: -150°C bis -5°C

Wir haben uns auf die Herstellung von Niedertemperaturkältemaschinen mit einem Temperaturregelbereich von bis zu -150°C spezialisiert, die den Kühlbedarf verschiedener Branchen decken.

Rückkühler (Water Cooled & Air Cooled)

Temperature Control Range: -120°C to +30°C

Unser Rückkühler arbeitet mit Niedertemperatur-Kältetechnik, die Temperatur beträgt bis zu -120℃, und verschiedene Zubehörteile sind anpassbar.

Raumtemperatur-Kühlgeräte / Kleinkühlgeräte

Temperaturregelbereich: +5°C bis +50°C

Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.

Kühlgeräte mit direkter Kühlung

Temperature Control Range: -120°C to -10°C

Er eignet sich für Orte mit kleiner Wärmeaustauschfläche und großem Wärmeaustausch.

Direktkühlende Ultra-Niedrigtemperatur-Kühlgeräte

Temperature Control Range: -150°C to -110°C

Customized solutions for your business.

Schrauben-Kühlmaschinen

Niedertemperatur-Schraubenkühlmaschinen und Raumtemperatur-Schraubenkühlmaschinen

Customized solutions for your business.