What are the environmental requirements for the installation of a 2 ton water chiller？

What are the environmental requirements for the installation of a 2 ton water chiller？

1. Choose a highly secure installation environment.

A LC -25°C ~ -5°C Low Temperature Chillers is equivalent to industrial production equipment of the same type. Other equipment requires the use of electric power to process raw materials, shape or perform work, and emit heat. It is generally equipped with a cooling system that circulates chilled water to remove heat. Therefore, during the operation of industrial chillers, it is also necessary to avoid high temperatures, flammable and explosive substances, in order to ultimately achieve the expected refrigeration efficiency.

2. Choose a well lit installation environment.

The maintenance and upkeep of the 2-ton chiller unit is essential, so in order to ensure good maintenance visibility in the later stage, it is necessary to choose a place with good lighting and brightness, so that the staff can carry out inspection, maintenance, and upkeep work in the later stage.

3. Choose an installation environment with low temperature and good ventilation.

As for the installation environment of low-temperature ventilation, it is conducive to the heat dissipation of the industrial chiller itself. It is usually required to install at least 1.5 meters away from the wall, which is conducive to ventilation and heat dissipation. The air circulation has a significant impact on improving the overall working efficiency of the chiller. Try to keep the room temperature below 40 ℃ and ensure good ventilation. If the temperature is below 40 ℃, the relative humidity of the environment must be below 90%.

4. On site environment for installation of chillers

The installation site needs to have good ventilation to prevent fluoride leakage from the chiller from causing indoor hypoxia and causing injury to operators.

The installation environment of the chiller must not contain flammable gases.

The chiller should not be installed in environments with high or low temperatures.

The installation environment of the chiller must not have open flames.

The chiller should not be installed in environments with excessive noise or vibration.

The chiller should not be installed in an environment that does not cause damage to metals, electrical components, etc.

The installation position of the chiller should have sufficient number of support points.

The installation site of the chiller needs to have sufficient load-bearing capacity to install the unit, as well as sufficient fastening measures.