Refrigeration and Heating Circulation System Used for Double-layer Glass Reactor
Double-layer glass reactors with refrigeration and heating circulation systems are a common equipment combination in laboratories and are widely used in chemistry, biology, medicine and other fields.
Connection method between double-layer glass reactor and refrigeration and heating circulation system
1. Equipment preparation
Ensure that the double-layer glass reactor and refrigeration and heating circulation systems are in good condition, all components are intact, and appropriate accessories and tools are selected according to experimental needs.
2. Connect the pipes
Use high temperature resistant and corrosion resistant hoses to connect the inlet and outlet of the double-layer glass reactor with the corresponding interfaces of the refrigeration and heating circulation systems. Make sure the connections are tight and reliable to prevent liquid or air leakage.
3. Check the tightness
After the connection is completed, check whether each connection is well sealed and ensure there is no leakage. If there is leakage, the connection parts should be rechecked and the tightening should be adjusted.
4. Debugging equipment
Turn on the refrigeration and heating cycle systems, adjust the temperature to the range required for the experiment, and observe the temperature changes in the double-layer glass reactor. At the same time, check whether the circulation pump is working properly and ensure that the circulating fluid can flow smoothly.
Precautions during use
1. Operating specifications
During the operation, the equipment instructions and experimental procedures should be strictly followed to ensure the safety and accuracy of the experiment.
2. Temperature control
During the experiment, you should pay close attention to the temperature changes in the double-layer glass reactor, and adjust the temperature settings of the refrigeration and heating cycle systems according to the experimental needs. Avoid temperatures that are too high or too low to affect the experimental results.
3. Liquid level check
Regularly check the liquid level in the double-layer glass reactor to ensure sufficient circulating liquid volume to avoid equipment damage or experimental failure due to low liquid level.
4. Maintenance
Regularly maintain the double-layer glass reactor and the refrigeration and heating circulation system, clean the surface of the equipment and internal pipes, check the wear and tear of each component, and replace damaged components in a timely manner.
5. Security protection
During the experiment, personal protective equipment such as protective glasses and gloves should be worn to avoid direct contact with high temperatures or corrosive substances. At the same time, keep the laboratory well ventilated to avoid the accumulation of toxic and harmful gases.
6. Exception handling
If an abnormality or malfunction is found in the equipment during the experiment, the experiment should be stopped immediately, the power of the equipment should be turned off, and professionals should be contacted for repair in a timely manner.
7. Processing after the experiment
After the experiment, the refrigeration and heating circulation systems should be closed and the connecting pipes between the double-layer glass reactor and the equipment should be disconnected. Clean the experimental site, return the equipment and organize the experimental data.
In summary, the double-layer glass reactor with refrigeration and heating circulation system plays an important role in the experimental process. By following the correct connection methods and precautions, the safety and smooth progress of the experiment can be ensured, the experimental efficiency can be improved, and the accuracy of the experimental results can be guaranteed. Therefore, when using these equipment, experimenters should fully understand and master the relevant operating skills and precautions to ensure the smooth progress of the experiment and the safety and stability of the laboratory.
We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.
Fornecemos soluções personalizadas não padronizadas. Estão disponíveis chillers de refrigeração simples e unidades combinadas de refrigeração e aquecimento.
Correio eletrónico: lilia@lneya.com ID WeChat: +8615251628237 WhatsApp: +86 17851209193
Sistemas de arrefecimento e aquecimento (série SUNDI)
- Faixa de temperatura: -120℃ ~ +350℃
- Controlo de temperatura inteligente e de alta precisão
- Capacidade de arrefecimento: 0,5kW ~ 1200kW
- Sistema totalmente fechado para prolongar a vida útil do fluido térmico
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | Série -10 ~ +150°C | Série -25 ~ +200°C | Série -25 ~ +300°C | Série -45 ~ +250°C | Série -45 ~ +300°C | Série -60 ~ +250°C | Série -60 ~ +300°C | Série -70 ~ +250°C | Série -80 ~ +250°C | Série -90 ~ +250°C | Série -100 ~ +100°C | ||
Capacidade de arrefecimento | 1,5 ~ 15kW | 1 ~ 200kW | 1 ~ 200kW | 0,45 ~ 200kW | 0,9 ~ 25kW | 0,25 ~ 60kW | 0,75 ~ 25kW | 0,4 ~ 15kW | 0,3 ~ 80kW | 0,2 ~ 80kW | 0,45 ~ 80kW | ||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Sistemas de arrefecimento e aquecimento (série WTD)
- (Reactores de canal micro / tubo especializados)
- Faixa de temperatura: -70℃ ~ +300℃
- Bomba de circulação de alto desempenho, efeito de controlo de temperatura mais estável
- Ampla gama de temperaturas para satisfazer as necessidades de mais indústrias
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | -70°C ~ +300°C | -45°C ~ +250°C | -70°C ~ +200°C | ||||||
Capacidade de arrefecimento | 1,1 ~ 7,5kW | 1,5 ~ 5,5kW | 11 ~ 50kW | ||||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Circuladores de arrefecimento e aquecimento
- Faixa de temperatura: -45℃ ~ +250℃
- Compressor Emerson Copeland, qualidade fiável
- Função de auto-diagnóstico, vários dispositivos de proteção de segurança
- Sistema totalmente fechado para prolongar a vida útil do fluido térmico
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | Série -25°C ~ +200°C | Série -45°C ~ +250°C | |||||||
Capacidade de arrefecimento | 1 ~ 15kW | 0,25 ~ 15kW | |||||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Circuladores de aquecimento
- Faixa de temperatura: +50℃ ~ +300℃
- Grande área de permuta de calor e velocidade de aquecimento rápida
- Função de auto-diagnóstico, vários dispositivos de proteção de segurança
- Sistema de circulação fechado, sem névoa de óleo a altas temperaturas
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | +50°C ~ +170°C (série UC) | +50°C ~ +300°C (série UC) | +50°C ~ +300°C (série UST) | ||||||
Capacidade de aquecimento | 5,5 ~ 15kW | 3,5 ~ 130kW | 3,5 ~ 95kW | ||||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Série TES (Controlo de temperatura para testes de combustíveis e óleos)
- Faixa de temperatura: -85℃ ~ +250℃
- Controlador PLC Siemens e acessórios de outras marcas
- Função de auto-diagnóstico, vários dispositivos de proteção de segurança
- Sistema de circulação totalmente fechado, sem névoa de óleo a altas temperaturas
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | Série -45°C ~ +250°C | Série -85°C ~ +200°C | Série -60°C ~ +200°C | ||||||
Capacidade de arrefecimento | 0,3 ~ 25kW | 0,25 ~ 25kW | 3 ~ 60kW | ||||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
TCU Sistema de controlo da temperatura de multi-reactores
- Faixa de temperatura: -120℃ ~ +250℃
- Controlo de temperatura selado e repetível
- Sistema auxiliar de aquecimento elétrico a óleo térmico incorporado
- Adicionar módulos de permuta de calor de fonte fria e quente de acordo com as necessidades
- Cada dispositivo é submetido a um teste de carga durante mais de 12 horas
Gama de temperaturas | Série -45°C ~ +250°C | Série -120°C ~ +250°C | Sistema de controlo de temperatura personalizado | RT+10°C ~ +135°C | |||||
Capacidade de aquecimento | 25 ~ 80kW | 25 ~ 80kW | Personalizado | 25 ~ 300kW | |||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Chillers de recirculação / Circulador refrigerado
O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.
Gama de temperaturas | Série -25°C ~ +30°C | Série -45°C ~ +30°C | Série -60°C ~ -20°C | Série -80°C ~ -20°C | Série -120°C ~ -70°C | ||||
Capacidade de arrefecimento | 0,8 ~ 30kW | 0,75 ~ 12kW | 0,4 ~ 6kW | 0,2 ~ 6kW | 0,3 ~ 5kW | ||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Mini Chillers / Small Chillers
O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.
Gama de temperaturas | -18°C ~ +30°C | Série +5°C ~ +35°C | |||||||
Capacidade de arrefecimento | 0,35 ~ 0,9kW | 1,8 ~ 50kW | |||||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Refrigeradores de baixa temperatura
Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.
Gama de temperaturas | Série -25°C ~ -5°C | Série -45°C ~ -10°C | Série -60°C ~ -10°C | Série -80°C ~ -30°C | Série -110°C ~ -50°C | Série -150°C ~ -110°C | |||
Capacidade de arrefecimento | 12 ~ 360kW | 6 ~ 180kW | 6 ~ 180kW | 4 ~ 180kW | 2 ~ 120kW | 2,5 ~ 11kW | |||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |
Chillers de alta temperatura
O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.
Gama de temperaturas | +5°C ~ +40°C | -25°C ~ +40°C | -45°C ~ +40°C | -80°C ~ +80°C | -100°C ~ +80°C | ||||
Capacidade de arrefecimento | 6 ~ 40kW | 2 ~ 15kW | 1 ~ 8kW | 0,6 ~ 3kW | 1,5 ~ 3kW | ||||
Nota: Qualquer faixa de temperatura de -150 ℃ ~ +350 ℃ e qualquer capacidade de resfriamento pode ser personalizada |